This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Hoàng Mạnh Hùng hunghm.vn at gmail.comThanks for your support. I only enabled TX --> still failed But then, I update libosmocombb, and enable TX --> connect network successful Your support is very helpful. 2013/4/15 Pavel Baturko <pabftk at gmail.com> > As I see your Channel Requests remain unanswered from the network. Are you > sure that you are using firmware compiled with enabled TX (I do not > remember if it could be observed from layer1.log)? > If yes, you can try not to use the ARFCN that is selected by MS > automatically (in your log - 748DCS) by signal level, but try to stick on > another ARFCN: e.g. 746DCS - second candidate by rxlev - or other. for this > case use "stick 746" option and check for network's answers (ImmAss or > ImmAssReject). > You can also try to use other SIMs. > > Thanks, > Pavel > > > On Mon, Apr 15, 2013 at 1:11 PM, Hoàng Mạnh Hùng <hunghm.vn at gmail.com>wrote: > >> Hi Pavel Baturko, >> >> >> mobile.cfg, mobile.log, layer1.log and other logs in case of automatic >> network selection "network-selection-mode auto" ans "no stick" option: >> >> root at UR:/tmp# telnet 127.0.0.1 4247 >> Trying 127.0.0.1... >> Connected to 127.0.0.1. >> Escape character is '^]'. >> Welcome to the OsmocomBB control interface >> >> OsmocomBB> en >> OsmocomBB# sho >> >> OsmocomBB# show ms >> MS '1' is up, service is limited >> IMEI: 357337016773249 >> IMEISV: 3573370167732490 >> IMEI generation: fixed >> automatic network selection state: A0 null >> cell selection state: PLMN search >> radio ressource layer state: idle >> mobility management layer state: MM idle, PLMN search >> >> OsmocomBB# show >> OsmocomBB# show sub >> OsmocomBB# show subscriber >> Mobile Subscriber of MS '1': >> IMSI: 452040399998391 >> ICCID: 89840403940099983911 >> Service Provider Name: VIETTEL >> SMS Service Center Address: +84980200030 >> Status: U2_NOT_UPDATED IMSI detached LAI: invalid >> Key: sequence 1 74 5d 70 bb 32 6a a0 00 >> Access barred cells: no >> Access classes: C4 >> List of preferred PLMNs: >> MCC |MNC >> -------+------- >> 452 |04 (Vietnam, Viettel Mobile) >> 456 |08 (Cambodia, Viettel) >> 457 |03 (Laos, Unitel) >> 372 |03 (Haiti, 03) >> >> OsmocomBB# show >> OsmocomBB# show sup >> OsmocomBB# show support >> Supported features of MS '1': >> Phase 2 mobile station >> R-GSM : yes >> E-GSM : yes >> P-GSM : yes >> GSM900 Class : 4 >> DCS 1800 : yes >> DCS Class : 1 >> GSM 850 : yes >> GSM 850 Class: 4 >> PCS 1900 : yes >> PCS Class : 1 >> GSM 480 : no >> GSM 450 : no >> CECS : no >> VGCS : no >> VBS : no >> SMS : yes >> SS_IND : yes >> PS_CAP : no >> CMSP : no >> SoLSA : no >> LCSVA : no >> LOC_SERV : no >> A5/1 : yes >> A5/2 : yes >> A5/3 : no >> A5/4 : no >> A5/5 : no >> A5/6 : no >> A5/7 : no >> A5/1 : yes >> Channels : SDCCH + TCH/F + TCH/H >> Full-Rate V1 : yes >> Full-Rate V2 : yes >> Full-Rate V3 : no >> Half-Rate V1 : yes >> Half-Rate V3 : no >> Min RXLEV : -106 >> >> OsmocomBB# call 1 0987785050 >> OsmocomBB# >> % (MS 1) >> % Call has been rejected >> >> OsmocomBB# sms 1 0987785050 testSMS >> OsmocomBB# >> % (MS 1) >> % SMS to 0987785050 failed: (MO) SMS rejected >> >> OsmocomBB# net >> OsmocomBB# network sho >> OsmocomBB# network show 1 >> >> OsmocomBB# >> % (MS 1) >> % Trying to registering with network... >> >> % (MS 1) >> % Trying to registering with network... >> >> % (MS 1) >> % Trying to registering with network... >> >> % (MS 1) >> % Searching network... >> >> >> % (MS 1) >> % Trying to registering with network... >> >> % (MS 1) >> % Trying to registering with network... >> >> % (MS 1) >> % Searching network... >> >> OsmocomBB# sms 1 0987785050 testSMS >> >> % (MS 1) >> % Trying to registering with network... >> call 1 0987785050 >> OsmocomBB# >> % (MS 1) >> % Call has been rejected >> >> OsmocomBB# sms 1 0987785050 testSMS >> OsmocomBB# >> % (MS 1) >> % SMS to 0987785050 failed: (MO) SMS rejected >> >> >> % (MS 1) >> % Trying to registering with network... >> >> >> >> 2013/4/15 Pavel Baturko <pabftk at gmail.com> >> >>> Hi, >>> >>> Could you please provide mobile.log and log from VTY in case of >>> automatic network selection "network-selection-mode auto" ans "no >>> stick" option? >>> >>> Thanks, >>> Pavel >>> >>> >>> On Mon, Apr 15, 2013 at 10:46 AM, hungbangchu <hunghm.vn at gmail.com>wrote: >>> >>>> Hi, >>>> >>>> My attachment is file mobile.log. >>>> >>>> Any one can mobile.log >>>> <http://baseband-devel.722152.n3.nabble.com/file/n4025987/mobile.log> >>>> help >>>> >>>> me? >>>> >>>> >>>> >>>> pab wrote >>>> > Hi, >>>> > >>>> >> There is no such command. >>>> >> Error occurred during reading below line: >>>> >> stick on >>>> > 'stick' option should be used as 'stick ARFCN'. with this option your >>>> MS >>>> > will be forced to use specific ARFCN. Be sure that this ARFCN is >>>> visible >>>> > by >>>> > your MS and owned by your SIM's service provider. >>>> > >>>> > Also I think it's difficult for people in this list to help you >>>> without >>>> > logs, at least attached mobile app log could help. >>>> > >>>> > Thanks, >>>> > Pavel >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> View this message in context: >>>> http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025987.html >>>> >>>> Sent from the baseband-devel mailing list archive at Nabble.com. >>>> >>>> >>> >> >> >> -- >> Thanks and Best Regards >> -- >> From: Hoàng Mạnh Hùng >> > > -- Thanks and Best Regards -- From: Hoàng Mạnh Hùng -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20130416/ab022cad/attachment.htm>