Osmocom-bb Making a call

Altaf altaf329 at gmail.com
Wed May 16 14:49:02 UTC 2012


Hello.

*Can someone help me out at this point of the Osmocom-bb project [making a
call]....

I am done with all the steps involved in the project. 
1. i have added the /.osmocom/bb/mobile.cfg
2. i am in the branch sylvian/testing

I used       git checkout --track -b remotes/origin/sylvian/testing     
command to enter this branch. It worked right... Am i RIGHT here?

3. when i download the firmware layer 1 on the phone it worked pretty good.
it says..*

handle_write(): finished
got 1 bytes from modem, data looks like: 1b  .
got 1 bytes from modem, data looks like: f6  .
got 1 bytes from modem, data looks like: 02  .
got 1 bytes from modem, data looks like: 00  .
got 1 bytes from modem, data looks like: 41  A
got 1 bytes from modem, data looks like: 03  .
got 1 bytes from modem, data looks like: 42  B
Received DOWNLOAD ACK from phone, your code is running now!
battery_compal_e88_init: starting up


OSMOCOM Layer 1 (revision osmocon_v0.0.0-1348-g083a2dc)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: f2d81c119e039be2
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
======================================================================
Power up simcard:
Assert DSP into Reset
Releasing DSP from Reset
Setting some dsp_api.ndb values
Setting API NDB parameters
DSP Download Status: 0x0001
DSP API Version: 0x0000 0x0000
Finishing download phase
DSP Download Status: 0x0002
DSP API Version: 0x3606 0x0000
LOST 1161!
BAT-ADC: 549   6   0   0 1023 349 328 204  
	Charger at 51 mV.
	Battery at 3753 mV.
	Charging at 0 mA.
	Battery capacity is 69%.
	Battery range is 3199..3999 mV.
	Battery full at 468 LSB .. full at 585 LSB
	Charging at 239 LSB (204 mA).
	BCICTL2=0x3ff
	battery-info.flags=0x00000000
	bat_compal_e88_chg_state=0

*
4.  when i launch the MOBILE application it says like*

000f> sim.c:1223 init SIM client
<0006> gsm48_cc.c:63 init Call Control
<0007> gsm480_ss.c:231 init SS
<0017> gsm411_sms.c:63 init SMS
<0001> gsm48_rr.c:5479 init Radio Ressource process
<0005> gsm48_mm.c:1315 init Mobility Management process
<0005> gsm48_mm.c:1037 Selecting PLMN SEARCH state, because no SIM.
<0002> gsm322.c:5025 init PLMN process
<0003> gsm322.c:5026 init Cell Selection process
Mobile '1' initialized, please start phone now!
VTY available on port 4247.
<0005> subscriber.c:601 Requesting SIM file 0x2fe2
<000f> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)
<000f> sim.c:697 go MF
<000f> sim.c:241 SELECT (file=0x3f00)



000f> sim.c:949 command successfull
<000f> sim.c:151 sending result to callback function (type=0)
<0005> subscriber.c:360 received SMSP from SIM (sca=+49232********000)
<0005> subscriber.c:561 (ms 1) Done reading SIM card
(IMSI=26****************654 Germany, E-Plus)
<0005> subscriber.c:573 -> SIM card registered to 262 03 (Germany, E-Plus)
<0005> gsm48_mm.c:4379 (ms 1) Received 'MMR_REG_REQ' event
<0002> gsm322.c:3806 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN
selection in state 'A0 null'
<000e> gsm322.c:1372 Start search of last registered PLMN (mcc=262 mnc=03 
Germany, E-Plus)
<0002> gsm322.c:1376 Use RPLMN (mcc=262 mnc=03  Germany, E-Plus)
<0002> gsm322.c:800 new state 'A0 null' -> 'A1 trying RPLMN'
<0003> gsm322.c:4037 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in
state 'C0 null'
<000e> gsm322.c:3619 Selecting PLMN (mcc=262 mnc=03  Germany, E-Plus)
<0003> gsm322.c:3628 Start normal cell selection.
<0003> gsm322.c:823 new state 'C0 null' -> 'C1 normal cell selection'
<0003> gsm322.c:2791 Scanning power for all frequencies.

*
Here its starts to search for frequencies and cells..... and see what
happens....
*

<0003> gsm322.c:2852 Scanning frequencies. (0..0)
<0003> gsm322.c:2913 Done with power scanning range.
<0003> gsm322.c:2791 Scanning power for all frequencies.
<0003> gsm322.c:2852 Scanning frequencies. (512(DCS)..512(DCS))
<0003> gsm322.c:2913 Done with power scanning range.
<0003> gsm322.c:2791 Scanning power for all frequencies.
<0003> gsm322.c:2852 Scanning frequencies. (975..975)
<0003> gsm322.c:2913 Done with power scanning range.
<0003> gsm322.c:2791 Scanning power for all frequencies.
<0003> gsm322.c:2813 Found no frequency.


This repeats all the TIME........


*I am able to login to the vty terminal and able to execute some
instructions.....
*
enable
show ms
show subscriber
etc*

when I try to make a call..... see what happens*

<0009> mnccms.c:570 Make call to 01747180018
<0009> mnccms.c:150  support TCH/H also
<0009> mnccms.c:174  support full rate v2
<0009> mnccms.c:178  support full rate v1
<0009> mnccms.c:187  support half rate v1
<0006> transaction.c:76 ms 1 allocates transaction (proto 3 trans_id 255
callref 1 mem 0x8cf7370)
<0006> gsm48_cc.c:243 new state NULL -> MM_CONNECTION_PEND
<0006> gsm48_cc.c:507 Sending MMCC_EST_REQ
<0005> gsm48_mm.c:3774 (ms 1) Received 'MMCC_EST_REQ' event in state MM idle
<0005> gsm48_mm.c:3777 -> substate PLMN search
<0005> gsm48_mm.c:3779 -> callref 1, transaction_id 255
<0005> gsm48_mm.c:3042 Init MM Connection, not in normal state.
<0006> gsm48_cc.c:2161 (ms 1) Received 'MMCC_REL_IND' in CC state
MM_CONNECTION_PEND
<0006> gsm48_cc.c:196 (ms 1 ti ff) Sending 'MNCC_REL_IND' to MNCC.
<0006> gsm48_cc.c:243 new state MM_CONNECTION_PEND -> NULL
<0006> transaction.c:104 ms 1 frees transaction (mem 0x8cf7370)
<0009> mnccms.c:372 Call has been released (cause 21)
<0009> mnccms.c:71 (call 1) Call removed.


0003> gsm322.c:2889 Getting PM for ARFCN 858(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 859(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 860(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 861(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 862(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 863(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 864(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 865(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 866(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 867(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 868(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 869(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 870(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 871(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 872(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 873(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 874(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 875(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 876(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 877(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 878(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 879(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 880(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 881(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 882(DCS) twice. Overwriting the
first! Please fix prim_pm.c
<0003> gsm322.c:2889 Getting PM for ARFCN 883(DCS) twice

I even find this sometimes................

can someone fix this for me.... where could be the error......

Looking forward for a helping hand.....


Thank you..



--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Osmocom-bb-Making-a-call-tp3997264.html
Sent from the baseband-devel mailing list archive at Nabble.com.




More information about the baseband-devel mailing list