This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Steve Markgraf steve at steve-m.deHi, On 04.09.2011 11:51, Basem Ahmed wrote: > linux-d5zo:/home/basem/osmocom-bb/src/host/osmocon # ./osmocon -p > /dev/ttyUSB0 -m c140xor > The filesize is larger than 15kb, code on the magic address will be > overwritten! > Use loader.bin and upload the application with osmoload instead! You need to chainload the application, see: http://bb.osmocom.org/trac/wiki/MotorolaC140#Bootloader So when using xor, the command would be: ./osmocon -p /dev/ttyUSB0 -m c140xor -c ../../target/firmware/board/compal_e86/layer1.highram.bin ../../target/firmware/board/compal_e86/chainload.compalram.bin Regards, Steve