Facing issues in using OSMOCOM

Basem Ahmed eng_basemm at yahoo.com
Wed Jun 15 08:17:43 UTC 2011


B-Mobile Output:
linux-d5zo:/home/basem/osmocom-bb/src/host/osmocon # ./osmocon -p /dev/ttyUSB0 -m c140xor ../../target/firmware/board/compal_e88/layer1.compalram.bin got 2 bytes from modem, data looks like: 04 81  ..got 5 bytes from modem, data looks like: 1b f6 02 00 41  ....Agot 1 bytes from modem, data looks
 like: 01  .got 1 bytes from modem, data looks like: 40  @Received PROMPT1 from phone, responding with CMD
The filesize is larger than 15kb, code on the magic address will be overwritten!Use loader.bin and upload the application with osmoload instead!
read_file(../../target/firmware/board/compal_e88/layer1.compalram.bin): file_size=54104, hdr_len=4, dnload_len=54111got 1 bytes from modem, data looks like: 1b  .got 1 bytes from modem, data looks like: f6  .got 1 bytes from modem, data looks like: 02  .got 1 bytes from modem, data looks like: 00  .got 1 bytes from modem, data looks like: 41  Agot 1 bytes from modem, data looks like: 02  .got 1 bytes from modem, data looks like: 43  CReceived PROMPT2 from phone, starting
 downloadhandle_write(): 4096 bytes (4096/54111)handle_write(): 4096 bytes (8192/54111)handle_write(): 4096 bytes (12288/54111)handle_write(): 4096 bytes (16384/54111)handle_write(): 4096 bytes (20480/54111)handle_write(): 4096 bytes (24576/54111)handle_write(): 4096 bytes (28672/54111)handle_write(): 4096 bytes (32768/54111)handle_write(): 4096 bytes (36864/54111)handle_write(): 4096 bytes (40960/54111)handle_write(): 4096 bytes (45056/54111)handle_write(): 4096 bytes (49152/54111)handle_write(): 4096 bytes (53248/54111)handle_write(): 863 bytes (54111/54111)handle_write(): finishedgot 1 bytes from modem, data looks like: 1b  .got 1 bytes from modem, data looks like: f6  .got 1 bytes from modem, data looks like: 02  .got 1 bytes from
 modem, data looks like: 00  .got 1 bytes from modem, data looks like: 41  Agot 1 bytes from modem, data looks like: 03  .got 1 bytes from modem, data looks like: 42  BReceived DOWNLOAD ACK from phone, your code is running now!

OSMOCOM Layer 1 (revision osmocon_v0.0.0-906-g5589a6b-modified)======================================================================Device ID code: 0xb4fbDevice Version code: 0x0000ARM ID code: 0xfff3cDSP ID code: 0x0128Die ID code: e144263d880014fd======================================================================REG_DPLL=0x2413CNTL_ARM_CLK=0xf0a1CNTL_CLK=0xff91CNTL_RST=0xfff3CNTL_ARM_DIV=0xfff9======================================================================Power up
 simcard:Assert DSP into ResetReleasing DSP from ResetSetting some dsp_api.ndb valuesSetting API NDB parametersDSP Download Status: 0x0001DSP API Version: 0x0000 0x0000Finishing download phaseDSP Download Status: 0x0002DSP API Version: 0x3606 0x0000LOST 1203!SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 0a Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f
 07 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 0b Status 1: 90 00SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 84 Status 1: 94 08SIM
 Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 23SIM Request (5): a0 c0 00 00 23 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 3c Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 31 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00
 01 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 46 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 11 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 78 Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 02 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7b Status 2: 9F 13SIM Request (5): a0 c0 00 00 13 Status 1: 90 00SIM Request (5): a0 b0 00 00 0c Status 1: 90 00L1CTL_RESET_REQ: FULL!L1CTL_PM_REQ start=100 end=104PM MEAS: ARFCN=100, 28   dBm at baseband, -109 dBm at RFPM MEAS: ARFCN=100, 30   dBm at baseband, -107 dBm at RFPM MEAS: ARFCN=101, 29  
 dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=102, 26   dBm at baseband, -112 dBm at RFPM MEAS: ARFCN=103, 34   dBm at baseband, -104 dBm at RFPM MEAS: ARFCN=104, 25   dBm at baseband, -112 dBm at RFL1CTL_PM_REQ start=106 end=106PM MEAS: ARFCN=106, 26   dBm at baseband, -111 dBm at RFPM MEAS: ARFCN=106, 25   dBm at baseband, -112 dBm at RFL1CTL_PM_REQ start=108 end=110PM MEAS: ARFCN=108, 31   dBm at baseband, -106 dBm at RFPM MEAS: ARFCN=108, 30   dBm at baseband, -107 dBm at RFPM MEAS: ARFCN=109, 25   dBm at baseband, -112 dBm at RFPM MEAS: ARFCN=110, 24   dBm at baseband, -113 dBm at RFL1CTL_PM_REQ start=112 end=121PM MEAS: ARFCN=112, 28   dBm at baseband, -109 dBm at RFPM MEAS: ARFCN=112, 27   dBm at baseband, -110 dBm at RFPM MEAS:
 ARFCN=113, 32   dBm at baseband, -105 dBm at RFPM MEAS: ARFCN=114, 29   dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=115, 29   dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=116, 30   dBm at baseband, -107 dBm at RFPM MEAS: ARFCN=117, 31   dBm at baseband, -106 dBm at RFPM MEAS: ARFCN=118, 33   dBm at baseband, -104 dBm at RFPM MEAS: ARFCN=119, 29   dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=120, 45   dBm at baseband, -92  dBm at RFPM MEAS: ARFCN=121, 65   dBm at baseband, -72  dBm at RFL1CTL_PM_REQ start=124 end=124PM MEAS: ARFCN=124, 29   dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=124, 29   dBm at baseband, -108 dBm at RFL1CTL_PM_REQ start=762 end=762PM MEAS: ARFCN=762, 84   dBm at baseband, -54  dBm at RFPM MEAS:
 ARFCN=762, 84   dBm at baseband, -53  dBm at RFL1CTL_PM_REQ start=765 end=768PM MEAS: ARFCN=765, 41   dBm at baseband, -96  dBm at RFPM MEAS: ARFCN=765, 42   dBm at baseband, -95  dBm at RFPM MEAS: ARFCN=766, 38   dBm at baseband, -99  dBm at RFPM MEAS: ARFCN=767, 57   dBm at baseband, -80  dBm at RFPM MEAS: ARFCN=768, 46   dBm at baseband, -91  dBm at RFL1CTL_PM_REQ start=773 end=773PM MEAS: ARFCN=773, 33   dBm at baseband, -105 dBm at RFPM MEAS: ARFCN=773, 32   dBm at baseband, -105 dBm at RFL1CTL_PM_REQ start=775 end=776PM MEAS: ARFCN=775, 48   dBm at baseband, -89  dBm at RFPM MEAS: ARFCN=775, 48   dBm at baseband, -89  dBm at RFPM MEAS: ARFCN=776, 41   dBm at baseband, -96  dBm at RFL1CTL_PM_REQ
 start=779 end=779PM MEAS: ARFCN=779, 51   dBm at baseband, -86  dBm at RFPM MEAS: ARFCN=779, 52   dBm at baseband, -85  dBm at RFL1CTL_PM_REQ start=797 end=797PM MEAS: ARFCN=797, 29   dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=797, 29   dBm at baseband, -108 dBm at RFL1CTL_PM_REQ start=816 end=816PM MEAS: ARFCN=816, 29   dBm at baseband, -108 dBm at RFPM MEAS: ARFCN=816, 28   dBm at baseband, -109 dBm at RFL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=762, flags=0x7)Starting FCCH RecognitionFB0 (1419:2): TOA= 1968, Power= -54dBm, Angle= 6913HzFB1 (1429:8): TOA= 9431, Power= -53dBm, Angle=  858Hz  fn_offset=1428 (fn=1429 + attempt=8 + ntdma = 7)m  delay=9 (fn_offset=1428 + 11 - fn=1429 - 1  scheduling next FB/SB detection task with delay 9FB1
 (1440:1): TOA=  683, Power= -53dBm, Angle=  165Hz  fn_offset=1439 (fn=1440 + attempt=1 + ntdma = 0)m  delay=9 (fn_offset=1439 + 11 - fn=1440 - 1  scheduling next FB/SB detection task with delay 9=>FB @ FNR 1439 fn_offset=1439 qbits=2548Synchronize_TDMALOST 2859!SB1 (2891:1): TOA=   23, Power= -53dBm, Angle=  135Hz=> SB 0x01e4ab7f: BSIC=31 fn=2492177(1879/25/11) qbits=0Synchronize_TDMA=>FB @ FNR 2890 fn_offset=2492177 qbits=4908LOST 1903!L1CTL_RESET_REQ: FULL!EMPTYL1CTL_FBSB_REQ (arfcn=762, flags=0x7)Starting FCCH RecognitionFB0 (2492554:3): TOA= 2544, Power= -54dBm, Angle= 6840HzL1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=762, flags=0x7)Starting FCCH RecognitionFB0 (2492575:9): TOA= 9312, Power= -54dBm, Angle= 6777HzFB1 (2492585:8): TOA=
 8755, Power= -53dBm, Angle= 1051Hz  fn_offset=2492583 (fn=2492585 + attempt=8 + ntdma = 6)m  delay=8 (fn_offset=2492583 + 11 - fn=2492585 - 1  scheduling next FB/SB detection task with delay 8FB1 (2492605:11): TOA=12503, Power= -53dBm, Angle=  160Hz  fn_offset=2492603 (fn=2492605 + attempt=11 + ntdma = 9)m  delay=8 (fn_offset=2492603 + 11 - fn=2492605 - 1  scheduling next FB/SB detection task with delay 8=> DSP reports FB in bit that is 1179237253 bits in the future?!?Synchronize_TDMALOST 3714!SB1 (2269562:1): TOA=   29, Power= -53dBm, Angle=    9Hz=> SB 0x00d6ab7f: BSIC=31 fn=2492615(1879/21/41)=> DSP reports SB in bit that is 1458016052 bits in the future?!?Synchronize_TDMA=> DSP reports FB in bit that is 1458016029 bits in the future?!?LOST
 1912!
Configuration for both :
OsmocomBB# show runnOsmocomBB# show running-config 
Current configuration:!!line vty no login!gps device /dev/ttyACM0gps baudrate defaultno gps enable!ms 1 layer2-socket /tmp/osmocom_l2 sap-socket /tmp/osmocom_sap sim
 reader network-selection-mode auto imei 000000000000000 0 imei-fixed no emergency-imsi no call-waiting no auto-answer no clip no clir tx-power auto no simulated-delay no stick location-updating codec full-speed prefer codec half-speed no abbrev support  sms  a5/1  a5/2  p-gsm  e-gsm  r-gsm  no gsm-850  dcs  no pcs  class-900 4  class-850 4  class-dcs 1  class-pcs 1  channel-capability sdcch+tchf+tchh  full-speech-v1  full-speech-v2 
 half-speech-v1  min-rxlev -106  dsc-max 90 exit test-sim  imsi 001010000000000  ki xor 00 00 00 00 00 00 00 00 00 00 00 00   no barred-access  no rplmn  hplmn-search foreign-country exit no shutdownexit!endOsmocomBB# Connection closed by foreign host.
Dear Andreas ,
Good day Sir , Actually i have two experiments for mobile project using Motorola C139 one with compal_e88 and the other with compal_e86 and here is the out put for both :
First using compal E86:
A- Layer 1 output:
linux-d5zo:/home/basem/osmocom-bb/src/host/osmocon # ./osmocon -p /dev/ttyUSB0 -m c140xor ../../target/firmware/board/compal_e86/layer1.compalram.bin 
got 2 bytes from modem, data looks like: 04 81  ..got 5 bytes from modem, data looks like: 1b f6 02 00 41  ....Agot 1 bytes from modem, data looks like: 01  .got 1 bytes from modem, data looks like: 40  @Received PROMPT1 from phone, responding with CMD
The filesize is larger than 15kb, code on the magic address will be overwritten!Use loader.bin and upload the application with osmoload instead!
read_file(../../target/firmware/board/compal_e86/layer1.compalram.bin): file_size=54736, hdr_len=4, dnload_len=54743got 1 bytes from modem, data looks like: 1b  .got 1 bytes from modem, data looks like: f6  .got 1 bytes from modem, data looks like: 02  .got 1 bytes from modem, data looks like: 00  .got 1 bytes from modem, data looks like: 41  Agot 1 bytes from modem, data looks like: 02  .got 1 bytes from modem, data looks like: 43  CReceived PROMPT2 from phone, starting downloadhandle_write(): 4096 bytes (4096/54743)handle_write(): 4096 bytes (8192/54743)handle_write(): 4096 bytes (12288/54743)handle_write(): 4096 bytes (16384/54743)handle_write(): 4096 bytes (20480/54743)handle_write(): 4096 bytes (24576/54743)handle_write(): 4096 bytes (28672/54743)handle_write(): 4096 bytes (32768/54743)handle_write(): 4096 bytes (36864/54743)handle_write(): 4096 bytes (40960/54743)handle_write(): 4096 bytes (45056/54743)handle_write(): 4096 bytes
 (49152/54743)handle_write(): 4096 bytes (53248/54743)handle_write(): 1495 bytes (54743/54743)handle_write(): finishedgot 1 bytes from modem, data looks like: 1b  .got 1 bytes from modem, data looks like: f6  .got 1 bytes from modem, data looks like: 02  .got 1 bytes from modem, data looks like: 00  .got 1 bytes from modem, data looks like: 41  Agot 1 bytes from modem, data looks like: 03  .got 1 bytes from modem, data looks like: 42  BReceived DOWNLOAD ACK from phone, your code is running now!

OSMOCOM Layer 1 (revision osmocon_v0.0.0-906-g5589a6b-modified)======================================================================Device ID code: 0xb4fbDevice Version code: 0x0000ARM ID code: 0xfff3cDSP ID code: 0x0128Die ID code: e144263d880014fd======================================================================REG_DPLL=0x2413CNTL_ARM_CLK=0xf0a1CNTL_CLK=0xff91CNTL_RST=0xfff3CNTL_ARM_DIV=0xfff9======================================================================Power up simcard:Assert DSP into ResetReleasing DSP from ResetSetting some dsp_api.ndb valuesSetting API NDB parametersDSP Download Status: 0x0001DSP API Version: 0x0000 0x0000Finishing download phaseDSP Download Status: 0x0002DSP API Version: 0x3606 0x0000LOST 346!SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 2f e2 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00
 00 0a Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 07 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7e Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 0b Status 1: 90 00SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 10 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 40 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 1c Status 1: 94 08SIM Request (7): a0 a4 00 00 02 3f 00 Status 2: 9F 22SIM Request (5): a0 c0 00 00 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 7f 20 Status 2: 9F 22SIM Request (5): a0 c0 00 00
 22 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 20 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 09 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 30 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 2c Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 31 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 01 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 46 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 11 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 78 Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 02 Status 1: 90 00SIM Request (7): a0 a4 00 00 02 6f 7b Status 2: 9F 0FSIM Request (5): a0 c0 00 00 0f Status 1: 90 00SIM Request (5): a0 b0 00 00 1e Status 1: 90 00
B-Mobile Output:
linux-d5zo:/home/basem/osmocom-bb/src/host/layer23/src/mobile # ./mobile -i 127.0.0.1Copyright (C) 2008-2010 ...Contributions by ...
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>This is free software: you are free to change and redistribute it.There is NO WARRANTY, to the extent permitted by law.
<000e> sim.c:1206 init SIM client<0005> gsm48_cc.c:61 init Call Control<0001> gsm48_rr.c:5052 init Radio Ressource process<0004> gsm48_mm.c:1239 init Mobility Management process<0004> gsm48_mm.c:990 Selecting PLMN SEARCH state, because no SIM.<0002> gsm322.c:3556 init PLMN process<0003> gsm322.c:3557 init Cell Selection process<0003> gsm322.c:3614 Read stored BA list (mcc=420 mnc=01  Saudi Arabia, Al Jawal)Mobile '1' initialized, please start phone now!VTY available on port 4247.<0004> subscriber.c:556 Requesting SIM file 0x2fe2<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949
 command successfull<000e> sim.c:241 SELECT (file=0x2fe2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:229 received ICCID 89966321051209484485 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f07<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins
 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f07)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:259 received IMSI 420032210948448 from SIM<0004>
 subscriber.c:556 Requesting SIM file 0x6f7e<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7e)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=11)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:295 received LOCI from SIM (mcc=420 mnc=03 lac=0x0529 U1)<0004> subscriber.c:556 Requesting SIM file 0x6f40<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT
 (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:706 requested path is longer, go child DFtelecom<000e> sim.c:241 SELECT (file=0x7f10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f40)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET
 RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=28)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=28 sw1=0x94 sw2=0x08)<000e> sim.c:952 command failed<000e> sim.c:151 sending result to callback function (type=1)<0004> subscriber.c:608 SIM reading failed, ignoring!<0004> subscriber.c:556 Requesting SIM file 0x6f20<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command
 successfull<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x22)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=34)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=34 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949
 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:342 received KEY from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f30<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f30)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=44)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=44 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:380 received PLMN selector (mcc=420 mnc=03) from SIM<0004> subscriber.c:380 received PLMN
 selector (mcc=424 mnc=01) from SIM<0004> subscriber.c:380 received PLMN selector (mcc=424 mnc=02) from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f31<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f31)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=1)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=1 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:401 received HPPLMN 5 (30 mins) from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f46<000e> sim.c:209 got
 new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f46)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=17)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=17 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:424 received SPN mobily from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f78<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f78)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f
 sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:442 received ACC 0100 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f7b<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7b)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x0f)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=15)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=15 sw1=0x90
 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=30)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=30 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:518 (ms 1) Done reading SIM card (IMSI=420032210948448 Saudi Arabia, Mobily)<0004> subscriber.c:530 -> SIM card registered to 420 03 (Saudi Arabia, Mobily)<0004> gsm48_mm.c:4160 (ms 1) Received 'MMR_REG_REQ' event<0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null'<000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=03  Saudi Arabia, Mobily)<0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=03  Saudi Arabia, Mobily)<0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN'<0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null'<000d> gsm322.c:3007
 Selecting network (mcc=420 mnc=03  Saudi Arabia, Mobily)<0003> gsm322.c:3016 Start normal cell selection.<0003> gsm322.c:559 new state 'C0 null' -> 'C1 normal cell selection'


Second using compal E88:
linux-d5zo:/home/basem/osmocom-bb/src/host/layer23/src/mobile # ./mobile -i 127.0.0.1Copyright (C) 2008-2010 ...Contributions by ...
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>This is free software: you are free to change and redistribute it.There is NO WARRANTY, to the extent permitted by law.
<000e> sim.c:1206 init SIM client<0005> gsm48_cc.c:61 init Call Control<0001> gsm48_rr.c:5052 init Radio Ressource process<0004> gsm48_mm.c:1239 init Mobility Management process<0004> gsm48_mm.c:990 Selecting PLMN SEARCH state, because no SIM.<0002> gsm322.c:3556 init PLMN process<0003> gsm322.c:3557 init Cell Selection process<0003> gsm322.c:3614 Read stored BA list (mcc=420 mnc=01  Saudi Arabia, Al Jawal)Mobile '1' initialized, please start phone now!VTY available on port 4247.<0004> subscriber.c:556 Requesting SIM file 0x2fe2<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949
 command successfull<000e> sim.c:241 SELECT (file=0x2fe2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=10 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:229 received ICCID 8996601230003583462 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f07<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins
 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f07)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:259 received IMSI 420012300358346 from SIM<0004>
 subscriber.c:556 Requesting SIM file 0x6f7e<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7e)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=11)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=11 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:295 received LOCI from SIM (mcc=420 mnc=01 lac=0x012f U1)<0004> subscriber.c:556 Requesting SIM file 0x6f40<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT
 (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:706 requested path is longer, go child DFtelecom<000e> sim.c:241 SELECT (file=0x7f10)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f40)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET
 RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=132)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=132 sw1=0x94 sw2=0x08)<000e> sim.c:952 command failed<000e> sim.c:151 sending result to callback function (type=1)<0004> subscriber.c:608 SIM reading failed, ignoring!<0004> subscriber.c:556 Requesting SIM file 0x6f20<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:697 go MF<000e> sim.c:241 SELECT (file=0x3f00)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command
 successfull<000e> sim.c:706 requested path is longer, go child DFgsm<000e> sim.c:241 SELECT (file=0x7f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x23)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=35)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=35 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:241 SELECT (file=0x6f20)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=9)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=9 sw1=0x90 sw2=0x00)<000e> sim.c:949
 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:342 received KEY from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f30<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f30)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=60)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=60 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:556 Requesting SIM file 0x6f31<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY
 (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f31)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=1)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=1 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:401 received HPPLMN 5 (30 mins) from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f46<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f46)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e>
 sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=17)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=17 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:635 SIM reading failed, file invalid<0004> subscriber.c:556 Requesting SIM file 0x6f78<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f78)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90
 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=2)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=2 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:442 received ACC 0040 from SIM<0004> subscriber.c:556 Requesting SIM file 0x6f7b<000e> sim.c:209 got new job: SIM_JOB_READ_BINARY (handle=00000004)<000e> sim.c:241 SELECT (file=0x6f7b)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xa4)<000e> sim.c:876 received APDU (len=0 sw1=0x9f sw2=0x13)<000e> sim.c:949 command successfull<000e> sim.c:571 GET RESPONSE (len=19)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xc0)<000e> sim.c:876 received APDU (len=19 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:277 READ BINARY (offset=0 len=12)<000e> sim.c:187 sending APDU (class 0xa0, ins 0xb0)<000e> sim.c:876 received APDU (len=12
 sw1=0x90 sw2=0x00)<000e> sim.c:949 command successfull<000e> sim.c:151 sending result to callback function (type=0)<0004> subscriber.c:518 (ms 1) Done reading SIM card (IMSI=420012300358346 Saudi Arabia, Al Jawal)<0004> subscriber.c:530 -> SIM card registered to 420 01 (Saudi Arabia, Al Jawal)<0004> gsm48_mm.c:4160 (ms 1) Received 'MMR_REG_REQ' event<0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for automatic PLMN selection in state 'A0 null'<000d> gsm322.c:1090 Start search of last registered PLMN (mcc=420 mnc=01  Saudi Arabia, Al Jawal)<0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01  Saudi Arabia, Al Jawal)<0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN'<0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell selection in state 'C0 null'<000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01  Saudi Arabia, Al Jawal)<0003> gsm322.c:3013 Start stored cell selection.<0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell
 selection'<0003> gsm322.c:2456 Getting PM for ARFCN 100 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 103 rxlev -104 (6))<0003> gsm322.c:2456 Getting PM for ARFCN 106 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 108 rxlev -106 (4))<0003> gsm322.c:2456 Getting PM for ARFCN 108 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2456 Getting PM for ARFCN 112 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 113 rxlev -105 (5))<0003> gsm322.c:2468 Found signal (ARFCN 117 rxlev -106 (4))<0003> gsm322.c:2468 Found signal (ARFCN 118 rxlev -104 (6))<0003> gsm322.c:2468 Found signal (ARFCN 120 rxlev -92 (18))<0003> gsm322.c:2468 Found signal (ARFCN 121 rxlev -72 (38))<0003> gsm322.c:2456 Getting PM for ARFCN 124 twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 762(DCS) rxlev
 -54 (56))<0003> gsm322.c:2456 Getting PM for ARFCN 762(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 762(DCS) rxlev -53 (57))<0003> gsm322.c:2468 Found signal (ARFCN 765(DCS) rxlev -96 (14))<0003> gsm322.c:2456 Getting PM for ARFCN 765(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 765(DCS) rxlev -95 (15))<0003> gsm322.c:2468 Found signal (ARFCN 766(DCS) rxlev -99 (11))<0003> gsm322.c:2468 Found signal (ARFCN 767(DCS) rxlev -80 (30))<0003> gsm322.c:2468 Found signal (ARFCN 768(DCS) rxlev -91 (19))<0003> gsm322.c:2468 Found signal (ARFCN 773(DCS) rxlev -105 (5))<0003> gsm322.c:2456 Getting PM for ARFCN 773(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 773(DCS) rxlev -105 (5))<0003> gsm322.c:2468 Found signal (ARFCN 775(DCS) rxlev -89 (21))<0003> gsm322.c:2456 Getting PM for ARFCN 775(DCS) twice. Overwriting
 the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 775(DCS) rxlev -89 (21))<0003> gsm322.c:2468 Found signal (ARFCN 776(DCS) rxlev -96 (14))<0003> gsm322.c:2468 Found signal (ARFCN 779(DCS) rxlev -86 (24))<0003> gsm322.c:2456 Getting PM for ARFCN 779(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2468 Found signal (ARFCN 779(DCS) rxlev -85 (25))<0003> gsm322.c:2456 Getting PM for ARFCN 797(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2456 Getting PM for ARFCN 816(DCS) twice. Overwriting the first! Please fix prim_pm.c<0003> gsm322.c:2396 Found 15 frequencies.<0003> gsm322.c:276 Sync to ARFCN=762(DCS) rxlev=-53 (No sysinfo yet, ccch mode NONE)<0003> gsm322.c:2486 Channel synched. (ARFCN=762(DCS), snr=9, BSIC=31)<0001> gsm322.c:2513 using DSC of 90<0003> gsm48_rr.c:4656 Channel provides data.<0001> sysinfo.c:711 Ignoring SYSTEM INFORMATION 4 until SI 1 is received.<0001>
 gsm48_rr.c:1869 New SYSTEM INFORMATION 4 (mcc 000 mnc 000 lac 0x0000)<0001> sysinfo.c:692 New SYSTEM INFORMATION 3 (mcc 420 mnc 01 lac 0x012f)<0001> gsm48_rr.c:1835 Changing CCCH_MODE to 1<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:1801 New SYSTEM INFORMATION 2ter<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING
 ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2129 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> sysinfo.c:599 Now decoding previously received SYSTEM INFORMATION 4<0001> sysinfo.c:432 Serving cell ARFCN #0: 797<0001> sysinfo.c:432 Serving cell ARFCN #1: 816<0001> sysinfo.c:446 Hopping ARFCN: 0 (bit 797)<0001> sysinfo.c:446 Hopping ARFCN: 1 (bit 816)<0001> gsm48_rr.c:1714 New SYSTEM INFORMATION 1<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2338 IMMEDIATE ASSIGNMENT:<0001>
 gsm48_rr.c:2350  (ta 0/0m ra 0x00 chan_nr 0x0e MAIO 0 HSN 43 TS 6 SS 0 TSC 6)<0001> gsm48_rr.c:2366 Not for us, no request.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:1743 New SYSTEM INFORMATION 2<0003> gsm322.c:1624 Cell ARFCN 762(DCS): Cell found, (rxlev=-53 mcc=420 mnc=01 lac=012f  Saudi Arabia, Al Jawal)<0003> gsm322.c:1635 Cell ARFCN 762(DCS) selected.<0003> gsm322.c:1955 Tune to frequency 762.<0003> gsm322.c:270 Sync to ARFCN=762(DCS) rxlev=-53 (Sysinfo, ccch mode NON-COMB)<0003> gsm322.c:1997 Cell available.<0003> gsm322.c:3396 (ms 1) Event 'EVENT_CELL_FOUND' for Cell selection in state 'C2 stored cell selection'<000d> gsm322.c:2798 Camping normally on cell (ARFCN=762(DCS) mcc=420 mnc=01  Saudi Arabia, Al Jawal)<0003> gsm322.c:559 new state 'C2 stored cell selection' -> 'C3 camped normally'<0004> gsm48_mm.c:4092 (ms 1) Received 'MM_EVENT_CELL_SELECTED'
 event in state MM IDLE, PLMN search<0004> gsm48_mm.c:901 new MM IDLE state PLMN search -> location updating needed<0004> gsm48_mm.c:901 new MM IDLE state location updating needed -> attempting to update<0004> gsm48_mm.c:2150 Do Loc. upd. for IMSI attach.<000d> gsm48_mm.c:2083 Perform location update (MCC 420, MNC 01 LAC 0x012f)<0004> gsm48_mm.c:2205 LOCATION UPDATING REQUEST<0004> gsm48_mm.c:2227  using LAI (mcc 420 mnc 01 lac 0x012f)<0004> gsm48_mm.c:2235  using TMSI 0x2804a1b5<0004> gsm48_mm.c:906 new state MM IDLE, attempting to update -> wait for RR connection (location updating)<0001> gsm48_rr.c:5019 (ms 1) Message 'RR_EST_REQ' received in state idle<000d> gsm48_rr.c:1245 Establish radio link due to mobility management request<0003> gsm322.c:3396 (ms 1) Event 'EVENT_LEAVE_IDLE' for Cell selection in state 'C3 camped normally'<0003> gsm322.c:3034 Going to camping (normal) ARFCN 762(DCS).<0003> gsm322.c:270 Sync to ARFCN=762(DCS) rxlev=-53
 (Sysinfo, ccch mode NON-COMB)<0001> gsm48_rr.c:363 new state idle -> connection pending<0001> gsm48_rr.c:1384 CHANNEL REQUEST: 00 (Location Update with NECI)<0003> gsm322.c:2486 Channel synched. (ARFCN=762(DCS), snr=11, BSIC=31)<0001> gsm322.c:2513 using DSC of 90<0003> gsm48_rr.c:4656 Channel provides data.<0001> gsm48_rr.c:1516 RANDOM ACCESS (requests left 5)<0001> gsm48_rr.c:1573 RANDOM ACCESS (Tx-integer 50 combined no S(lots) 0 ra 0x0a)<0001> gsm48_rr.c:1612 Use MS-TXPWR-MAX-CCH power value 0 (30 dBm)<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:2077 PAGING ignored, we are not camping.<0001> gsm48_rr.c:609 MON: f=762 lev=-51 snr= 0 ber= 32 LAI=420 01 012f ID=2dcf<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON:
 no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001>
 gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info<0001> gsm48_rr.c:609 MON: no cell info^CSignal 2 received.<0004> gsm48_mm.c:4096 (ms 1) Received 'MM_EVENT_IMSI_DETACH' event in state wait for RR connection (location updating)<0004> gsm48_mm.c:1862 IMSI detach delayed.<0001> gsm48_rr.c:609 MON: no cell info
OsmocomBB# show ms 1MS '1' is up, MM connection active  IMEI: 000000000000000     IMEISV: 0000000000000000     IMEI generation: fixed  automatic network selection state: A1 trying RPLMN  cell selection state: C3 camped normally  radio ressource layer state: connection pending  mobility management layer state: wait for RR connection (location updating)
I am hoping to read soon from you people.
Regards,Basem
--- On Tue, 6/14/11, Andreas.Eversberg <Andreas.Eversberg at versatel.de> wrote:

From: Andreas.Eversberg <Andreas.Eversberg at versatel.de>
Subject: Re: Facing issues in using OSMOCOM
To: "Basem Ahmed" <eng_basemm at yahoo.com>
Cc: baseband-devel at lists.osmocom.org
Date: Tuesday, June 14, 2011, 2:07 PM

can you send the full mobile output? (from start of application until it
halts)

>    <0002> gsm322.c:3176 (ms 1) Event 'EVENT_SIM_INSERT' for
automatic PLMN selection in state 'A0 null'
>    <000d> gsm322.c:1090 Start search of last registered PLMN
(mcc=420 mnc=01  Saudi Arabia, Al Jawal)
>    <0002> gsm322.c:1094 Use RPLMN (mcc=420 mnc=01  Saudi Arabia,
 Al
Jawal)
>    <0002> gsm322.c:530 new state 'A0 null' -> 'A1 trying RPLMN'
>    <0003> gsm322.c:3396 (ms 1) Event 'EVENT_NEW_PLMN' for Cell
selection in state 'C0 null'
>    <000d> gsm322.c:3007 Selecting network (mcc=420 mnc=01  Saudi
Arabia, Al Jawal)
>    <0003> gsm322.c:3013 Start stored cell selection.
>    <0003> gsm322.c:559 new state 'C0 null' -> 'C2 stored cell
selection'

can you send me the your ~/.osmocom/bb/1.ba file? don't worry, it will
only contain band allocations you have received so far. (rename it an
see, if the problem still exists.)


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20110615/cd21ce5f/attachment.html>


More information about the baseband-devel mailing list