This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/baseband-devel@lists.osmocom.org/.
Christoffer Jerkeby kugghjul at gmail.comOn Fri, Dec 9, 2011 at 6:06 AM, Sreeraj R <rsreeraj at gmail.com> wrote:
> Hi all,
>
> I am just a beginner and is using the following hardware
>
> Phone : C117
> Serial Adapter : CP2102 based
>
>
> The propt message that I am getting is different compared to that mentioned in
> the wiki (http://bb.osmocom.org/trac/wiki/CompalRamloader).
>
>
> Command: ./osmocon -d t -p /dev/ttyUSB0 -m c123
> ../../target/firmware/board/compal_e88/loader.compalram.bin
>
> Gives me the following data
>
> {00,f1,01,72,82,bf,7d,fd,7f,00,a6,51,d2,51,0a,3a,02,4d,a3,a3,da,00,00}
>
>
> Entire log after short power button key press is http://pastebin.com/AqcNm6dq.
>
> Can anyone give some pointers, or did I go wrong somewhere. The wiki specifies
> C117 board is similar to C123.
>
>
> regards
> Sreeraj R
>
>
Hi Sreeraj,
I suggest you try
./osmocon -d t -p /dev/ttyUSB0 -m c123xor
../../target/firmware/board/compal_e88/loader.compalram.bin
Best regards Kugg