This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Amber and Sarosh amber_sarosh at hotmail.comHi, Thankyou for your response. For installation of osmo-bts we are following the instructions at http://openbsc.osmocom.org/trac/wiki/network_from_scratch . Kindly inform which branch should we use? Regards, Amber & Sarosh > From: alexander.chemeris at gmail.com > Date: Mon, 27 Apr 2015 15:25:08 -0400 > Subject: Re: Query - Running two ARFCN on UmTRX using OsmoBTS > To: amber_sarosh at hotmail.com > CC: umtrx at lists.osmocom.org; andy.avtushenko at gmail.com > > Amber & Sarosh, > > It looks like you're using a wrong version of osmo-bts. Whuch branch > and commit are you using? > > On Mon, Apr 27, 2015 at 5:39 AM, Amber and Sarosh > <amber_sarosh at hotmail.com> wrote: > > Hi > > Thanks for your reply. We have tested the configurations that you mailed but > > our setup still produces the following error message when osmobts is run; > > > > <0006> scheduler.c:212 Init scheduler for trx=0 > > <000a> trx_if.c:485 Open transceiver for trx=0 > > <000a> trx_if.c:496 Waiting for transceiver send clock > > There is no such command. > > Error occurred during reading below line: > > rxgain 12 > > > > Unknown TRX 1. Aavialable TRX are: 0..0 > > Failed to parse the config file: '/root/.osmocom/osmo-bts.cfg' > > > > Any help in this regard is much appreciated. Thanks. > > > > Regards, > > Amber & Sarosh > > > > > > ________________________________ > > Date: Fri, 24 Apr 2015 08:54:35 -0800 > > Subject: Query - Running two ARFCN on UmTRX using OsmoBTS > > From: andy.avtushenko at gmail.com > > To: amber_sarosh at hotmail.com > > CC: fairsupport at fairwaves.co > > > > > > Hello Amber & Sarosh > > You have to add these lines below into /etc/osmocom/openbsc.cfg right after > > trx0 configuration > > trx 1 > > rf_locked 0 > > arfcn 184 (set the right ARFCN for you here ) > > nominal power 23 > > max_power_red 0 > > rsl e1 tei 0 > > timeslot 0 > > phys_chan_config TCH/F > > timeslot 1 > > phys_chan_config TCH/F > > timeslot 2 > > phys_chan_config TCH/F > > timeslot 3 > > phys_chan_config TCH/F > > timeslot 4 > > phys_chan_config TCH/F > > timeslot 5 > > phys_chan_config TCH/F > > timeslot 6 > > phys_chan_config TCH/F > > timeslot 7 > > phys_chan_config TCH/F > > > > And add into etc/osmocom/osmo-bts.cfg > > > > trx 1 > > rxgain 12 > > power 0 > > > > restart services: sudo sv restart osmo-trx osmo-bts osmo-nitb > > > > Regarding trx band dividing, theoretically it might possible but we haven't > > tested that > > -- > > Best regards, > > Andy > > > > -- > Regards, > Alexander Chemeris. > CEO, Fairwaves, Inc. > https://fairwaves.co -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20150428/137c0e0a/attachment.htm>