This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Craig Reading craig.reading1 at gmail.comHi Alexander, I only changed the IP since I do not think changing the mask using the following commands is supported: ./usrp_burn_mb_eeprom --args="addr=xxx.xxx.xxx.xxx" --key=*subnet * --val=255.255.255.0 ./usrp_burn_mb_eeprom --args="addr=xxx.xxx.xxx.xxx" --key=*gateway * --val=xxx.xxx.xxx.xxx I'm doing some more tracing soon. Regards Craig On 19 March 2013 12:47, Alexander Chemeris <alexander.chemeris at gmail.com>wrote: > Craig, > > On Mon, Mar 18, 2013 at 10:33 PM, Craig Reading > <craig.reading1 at gmail.com> wrote: > > Moved UmTRX on to 192.168.11.10 and get no ARP reply. I'm probably being > dumb! Just wanted to make sure there is no issue with subnet mask etc. > > Have you changed subnet mask or IP address only? > > Changing IP addresses on UmTRX works fine here. E.g. for the network > at CCC we ran all UmTRX's at 192.168.51.xx subnetwork. I've never > tried to change mask, though. > > If you want to debug - here is the code which controls networking in > ZPU in UmTRX: > > https://github.com/fairwaves/UHD-Fairwaves/blob/fairwaves/umtrx/firmware/zpu/lib/net_common.c > > -- > Regards, > Alexander Chemeris. > CEO, Fairwaves LLC / ООО УмРадио > http://fairwaves.ru > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20130319/2f047b84/attachment.htm>