This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Alexander Chemeris alexander.chemeris at gmail.comDoes it show proper frequency offset? I suspect it might give wrong offsets due to different sampling frequency. On Tue, Jul 9, 2013 at 12:39 PM, jiangwy <wyjiang at ljshuoda.com> wrote: > I have downloaded the source code from > https://github.com/ttsou/kalibrate-uhd and built it. > It can work. > > By the way, my system is Ubuntu 12.04. > > ________________________________ > jiangwy > > From: Alexander Chemeris > Date: 2013-07-08 18:18 > To: wyjiang > CC: UmTRX > Subject: Re: How to Get libusrp > Jiang, > > libusrp is only used for USRP1, for UmTRX you should use UHD instead > of libusrp. A version of kal with the UHD support is available at > Thomas Tsou's repository, but we have never tested it with UmTRX. > Please let everyone know if you could get it working: > https://github.com/ttsou/kalibrate-uhd > > > > On Mon, Jul 8, 2013 at 2:05 PM, jiangwy <wyjiang at ljshuoda.com> wrote: >> Hi All, >> >> I want to build kal-v0.4.1. >> When use CXXFLAGS='-W -Wall -O3' ./configure >> Output errors: >> >> configure: error: Package requirements (usrp >= 3.3) were not met: >> >> No package 'usrp' found >> >> I'm using ubuntu 12.04. How can I install libusrp? >> ' sudo apt-get install libusrp-dev' not working! >> >> ________________________________ >> Jiang Wenyi > > > > -- > Regards, > Alexander Chemeris. > CEO, Fairwaves LLC / ООО УмРадио > http://fairwaves.ru -- Regards, Alexander Chemeris. CEO, Fairwaves LLC / ООО УмРадио http://fairwaves.ru