This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Harald Welte hwelte at sysmocom.deDear all, On Wed, Nov 07, 2012 at 08:54:29PM +0400, Andrey Sviyazov wrote: > As known, hardware developing impossible without soldering iron. > With UmTRXv2 I found that was used very infusible solder paste. > As I understand it is due to compliance to Pb-free. Please note that RoHS is not a requirement in Europe for telecom equipment! So if you have a SMT factory that still uses solder with Pb, you can avoid those issues. -- - Harald Welte <hwelte at sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Schivelbeiner Str. 5 * 10439 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Directors: Holger Freyther, Harald Welte