This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Andrey Sviyazov andreysviyaz at gmail.comHi all. First release of UmTRXv1b seems finished. All suggestions and issues are welcomed, especially prior to production (few days). There are 4 Rx inputs to implement either scan function or software diversity receiving. There are 16pin connector to supply and control external preselector, amplifier, LNA, ATT, diversity switch... This new release have 2U size (100x160mm) that more universal for indoor housing to put together several UmTRX's with PC and power supply modules in one rack. Also possible variant to meet to requirements -40C and it is the only one reason to keep OCVCXO onboard. Also possible variant with external control panel to make easily IP65 housing design. Also DC supply voltage can be in range 8..28V to keep single DC supply if UmTRX will combined with IP65 tower mounted amplifiers. And so on depend of your fantasy :) Here included some project files and BOM for variant with 20dBm Tx and onboard control. PCB and PDF files will be in the next two e-mails. Best regards, Andrey Sviyazov. 2012/5/21 Alexander Chemeris <alexander.chemeris at gmail.com> > Andrey, > > On Sun, May 20, 2012 at 6:46 PM, Andrey Sviyazov <andreysviyaz at gmail.com> > wrote: > > 1) Is it used somewhere? In the datasheet there is probable errors, for > > example, 1PPS is specified as input. > > Use this datasheet, here it's marked as output: > http://www.transystem.com.tw/product/66/EB-570%20Data%20Sheet%20V1.4.pdf > Probably you have an older version of the datasheet. > > > 2) There are inputs Reset and Standby. The first can be left open, and > the > > second is possible need to be connected to to FPGA. > > Yes. > > > 3) There Is RTC_CLK_O we don't need him? And that there may be, 32768? > > Could you route it to a test-point or a 2-pin IDC? I don't think we > need this, but it's better to have an ability to access it. > > > 4) Which of two UART's better to use or are they equivalent? There are no > > any words in datasheet about it. > > Use TX0/RX0 (pins 13/14), which is default to NMEA - see the datasheet > above. > > > 5) Unfortunately no place for both on PCB and we can use either EB-230 or > > EB-570. > > Then we have to use EB-570. > > > -- > Regards, > Alexander Chemeris. > CEO, Fairwaves LLC / ООО УмРадио > http://fairwaves.ru > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20120529/3ce4b233/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: UmTRXv1b_prj (29.05.2012 2-59-49).zip Type: application/zip Size: 1478450 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20120529/3ce4b233/attachment.zip>