This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/UmTRX@lists.osmocom.org/.
Andrey Sviyazov andreysviyaz at gmail.comHi Jean-Samuel. Took another week, but still no news from you. Could you please inform us about the progress in the production of prototypes. Best regards, Andrey Sviyazov. 2012/6/13 Andrey Sviyazov <andreysviyaz at gmail.com> > Hi Jean-Samuel. > > Please inform us about fabrication progress even there are no issues. > > Best regards, > Andrey Sviyazov. > (Sent from my mobile client) > 12.06.2012 4:48 пользователь "Andrey Sviyazov" <andreysviyaz at gmail.com> > написал: > > Here PcbDoc file @ 12/06/2012 . >> So, it all done :) >> >> Best regards, >> Andrey Sviyazov. >> >> >> >> 2012/6/12 Andrey Sviyazov <andreysviyaz at gmail.com> >> >>> Hi all! >>> >>> Here final project UmTRXv2 @ 12/06/2012 (PcbDoc file will be attached to >>> the next e-mail). >>> I found an mistake with non-SMD LED's positions in compare to Ettus >>> where A-B in left-to-right orientation (see picture). >>> Andrew Karpenkov suggested me to change it because of it is not yet >>> standard but people accustomed to this. >>> It is done. >>> >>> Also he suggest me to make four test points for RXOUT legs of LMS >>> because he work with this now and found it helpfull. >>> It is done. >>> >>> Also test points which without connector now referenced as TST and >>> therefore RefDes of some connectors changed. >>> >>> Jean-Samuel, please find Gerber files, NC drill and layer stack >>> desription files which usually required to produce PCB. >>> >>> Best regards, >>> Andrey Sviyazov. >>> >>> >>> >>> 2012/6/10 Andrey Sviyazov <andreysviyaz at gmail.com> >>> >>>> Hi all! >>>> >>>> Here final project UmTRXv2 @ 10/06/2012 (PcbDoc file will be attached >>>> to the next e-mail). >>>> Jean-Samuel, please check SMD LED's placed at the front edge of the PCB. >>>> If you agree with this variant then I'll generate Gerber files vs >>>> required layers and description to produce PCB. >>>> If anybody find any mistake, please inform me immediatelly. >>>> >>>> Best regards, >>>> Andrey Sviyazov. >>>> >>> >>> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/umtrx/attachments/20120618/7f8fff24/attachment.htm>