This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/simtrace@lists.osmocom.org/.
Min Xu min.xu at min-info.netHi I made most of the recent changes to the v1 firmware to increase its stability. As far as I can tell, the changes I submitted was reliable and we use it with lots of phones and sim cards. If you are seeing the device looping the text from the beginning of the BOOT [000001] ...then that means your device is REBOOTING a lot. Perhaps check USB cable? or USB connector or other USB issues? If Wireshark was not able to sync to the GSMTAP ATR data (although we don't use Wireshark dissector, we use our own dissector), it mostly likely means you are not using the version where additional bytes were inserted into the simtrace response header to account the length of USB data transfer. I have not been tracking the current / latest built firmware so I don't know if the fields in question are added both in the firmware and in the desktop software. For reference, please look at this the mailing list archive for Nov 2017 ( http://lists.osmocom.org/pipermail/simtrace/2017-November/000746.html ) and Sep 2013 http://lists.osmocom.org/pipermail/simtrace/2013-September/thread.html Also, please double check that the board does not power up the Phone side SIM interface, see: http://lists.osmocom.org/pipermail/simtrace/2017-November/000746.html Best Regards On Wed, Sep 26, 2018 at 2:36 AM > From: "Александр Федоров" <wind3style at gmail.com> > To: simtrace at lists.osmocom.org > Cc: > Bcc: > Date: Wed, 26 Sep 2018 19:22:14 +0700 > Subject: Fwd: SIMtrace > > -- > Fedorov Alexander > Mobile: +7-908-212-98-05https://www.linkedin.com/in/wind3style/ <http://www.svyazcom.ru/en/>E-mail:wind3style at gmail.com > > <http://www.svyazcom.ru> > > > > ---------- Forwarded message --------- > From: Александр Федоров <wind3style at gmail.com> > Date: ср, 26 сент. 2018 г. в 17:59 > Subject: SIMtrace > To: <hwelte at hmw-consulting.de> > > > Hello Harald! > > I am writing to you from far Siberia. > I use SIMtrace v1 and I have some problem. > Could you halp me? > firmware v0.5 lose data and data in Wireshark isn't corrected: > [image: image.png] > Can I resolve my problem on V1 Simtrace or I have to buy SIMtrace V2? > > last version firmware from repository doesn't work correctly at all by > looping this DEBUG text: > [000001] (C) 2006-2011 by Harald Welte <hwelte at hmw-consulting.de> > This software is FREE SOFTWARE licensed under GNU GPL > [000002] Version 0.5.27-5a40-dirty compiled 20180926-170104 by > xmobi at xmobi-B250M-DS3H > > [000003] > DEBUG Interface: > 0) Set Pull-up 1) Clear Pull-up 2) Toggle LED1 3) Toggle LED2 > 9) Reset > [000004] RSTC_SR=0x00010200 > [000005] LARGE req_ctx[00] initialized at 002055AC, Data: 00200A68 => > 00200E28 > [000006] LARGE req_ctx[01] initialized at 002055C0, Data: 00200E28 => > 002011E8 > [000007] LARGE req_ctx[02] initialized at 002055D4, Data: 002011E8 => > 002015A8 > [000008] LARGE req_ctx[03] initialized at 002055E8, Data: 002015A8 => > 00201968 > [000009] LARGE req_ctx[04] initialized at 002055FC, Data: 00201968 => > 00201D28 > [00000A] LARGE req_ctx[05] initialized at 00205610, Data: 00201D28 => > 002020E8 > [00000B] LARGE req_ctx[06] initialized at 00205624, Data: 002020E8 => > 002024A8 > [00000C] LARGE req_ctx[07] initialized at 00205638, Data: 002024A8 => > 00202868 > [00000D] LARGE req_ctx[08] initialized at 0020564C, Data: 00202868 => > 00202C28 > [00000E] LARGE req_ctx[09] initialized at 00205660, Data: 00202C28 => > 00202FE8 > [00000F] LARGE req_ctx[10] initialized at 00205674, Data: 00202FE8 => > 002033A8 > [000010] LARGE req_ctx[11] initialized at 00205688, Data: 002033A8 => > 00203768 > [000011] LARGE req_ctx[12] initialized at 0020569C, Data: 00203768 => > 00203B28 > [000012] LARGE req_ctx[13] initialized at 002056B0, Data: 00203B28 => > 00203EE8 > [000013] LARGE req_ctx[14] initialized at 002056C4, Data: 00203EE8 => > 002042A8 > [000014] LARGE req_ctx[15] initialized at 002056D8, Data: 002042A8 => > 00204668 > [000015] LARGE req_ctx[16] initialized at 002056EC, Data: 00204668 => > 00204A28 > [000016] LARGE req_ctx[17] initialized at 00205700, Data: 00204A28 => > 00204DE8 > [000017] LARGE req_ctx[18] initialized at 00205714, Data: 00204DE8 => > 002051A8 > [000018] LARGE req_ctx[19] initialized at 00205728, Data: 002051A8 => > 00205568 > [000019] Inititalizing usbcmd_gen_init > [00001A] udp_open(440): entering > [00001B] USART Initializing > [00001C] pio_irq_register(109): registering handler 001079bc for PIOA 7 > [00001D] RST > [00001E] computed Fi(1) Di(1) ratio: 372 > > -- > Fedorov Alexander > Mobile: +7-908-212-98-05https://www.linkedin.com/in/wind3style/ <http://www.svyazcom.ru/en/>E-mail:wind3style at gmail.com > > <http://www.svyazcom.ru> > > _______________________________________________ > simtrace mailing list > simtrace at lists.osmocom.org > https://lists.osmocom.org/mailman/listinfo/simtrace > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20180926/a8f54960/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: image.png Type: image/png Size: 187887 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20180926/a8f54960/attachment.png>