This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/simtrace@lists.osmocom.org/.
J. Félix Ontañon felix.ontanon at podsystem.comGood to know. I'll give a try dfu-util 0.5 next time. You're right: SAM-BA made me loose so much time. 2016-11-10 13:34 GMT+01:00 Michael Kramer <michael.kramer at uni-konstanz.de>: > Hey Felix, > > thank you for your answer! > However since holger recommended dfu-util 0.4 I tried the 0.5 version > since 0.4 was not available on the website. With the 0.5 version it works. > Hope this helps you as well since it's easier to flash. > > Greetings, > Michael > > Am Dienstag, 08. November 2016 17:47 CET, J. Félix Ontañon < > felix.ontanon at podsystem.com> schrieb: > > > Hi Michael, > > > > Just to let you know dfu-util 0.9 didn't worked for me either, but > > SAM-BA/sam7utils did! > > > > I just followed this simtrace wiki page instructions to do so (flashing > > using libusb): https://osmocom.org/projects/simtrace/wiki/SIMtrace_ > Firmware > > The wiki page has the firmware attached in the format required by > SAM-BA. I > > compiled it myself with the arm toolchain, though. The tricky part was > > switching to SAM-BA mode, what the wiki page says is true: sometimes it > > just not works ... After 3 or 4 attempts it worked. > > > > I hope this helps. > > Regards. > > > > 2016-10-16 22:28 GMT+02:00 Holger Freyther <holger at freyther.de>: > > > > > > > > > > On 16 Oct 2016, at 22:15, Michael Kramer < > michael.kramer at uni-konstanz.de> > > wrote: > > > > > > > > > > > > Am Freitag, 14. Oktober 2016 22:19 CEST, Holger Freyther < > > holger at freyther.de> schrieb: > > > > > > > >>> > > > >>> I've tried both dfu-utils 0.8 and 0.9 on a debian and kali machine. > > Haven't used SAM-BA yet. Should I try that as well? > > > >> > > > >> SAM-BA is a lot more inconvenient and slower than dfu-utils. Could > you > > try an older version of dfu-utils? E.g. I started with dfu-utils and > > > probably still have this version around. > > > > > > > > Could you maybe check which version it was? > > > > > > oh. I did and then didn't write it down. It was dfu-util 0.4 that I > have > > used in > > > the past. > > > > > > holger > > > > > > > -- *J. Félix Ontañón* -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20161110/a2a59155/attachment.htm>