No subject


Fri Jan 29 12:04:42 UTC 2016


The first time it even sends a C-APDU, but no SW is returned.
Also the data stream (ATR and APDU) look correct, so it does no seem to be a speed issue.

I only had the card for 5 minutes and did not try to debug it more (check it the PPS fails, or something afterwards) or use an oscilloscope.
But maybe someone might have an idea.

Here the SIMtrace log:
Entering main loop
ATR APDU: 3b 9f 95 80 1f c7 80 31 a0 73 be 21 13 67 d0 02 04 09 01 00 00 05 
PPS(Fi=9/Di=5) ATR APDU: 3b 9f 95 80 1f c7 80 31 a0 73 be 21 13 67 d0 02 04 09 01 00 00 05 
PPS(Fi=9/Di=5) APDU: 00 a4 00 0c 02 fc 00 
ATR APDU: 3b 9f 95 80 1f c7 80 31 a0 73 be 21 13 67 d0 02 04 09 01 00 00 05 
PPS(Fi=9/Di=5) ATR APDU: 3b 9f 95 80 1f c7 80 31 a0 73 be 21 13 67 d0 02 04 09 01 00 00 05 

And here the debug log:
main(76): entering main (idle) loop
VCC_PHONE off
VCC_PHONE on
RST
computed Fi(1) Di(1) ratio: 372
found Fi=9 Di=5
computed Fi(9) Di(5) ratio: 32
nRST
VCC_PHONE off
VCC_PHONE on
RST
computed Fi(1) Di(1) ratio: 372
found Fi=9 Di=5
computed Fi(9) Di(5) ratio: 32
nRST
VCC_PHONE off
VCC_PHONE on
RST
computed Fi(1) Di(1) ratio: 372
found Fi=9 Di=5
computed Fi(9) Di(5) ratio: 32
nRST
VCC_PHONE off
VCC_PHONE on
RST
computed Fi(1) Di(1) ratio: 372
found Fi=9 Di=5
computed Fi(9) Di(5) ratio: 32
nRST
VCC_PHONE off

thank,
kevin




More information about the simtrace mailing list