Printing Fi/Di values from simtrace host tool (PPS)

historical

On Sun, Feb 12, 2012 at 03:22:41PM +0100, Harald Welte wrote:
> Hi again,
> 
> On Sun, Feb 12, 2012 at 02:46:37PM +0100, Myonium wrote:
> 
> > Thank you for the fast reply.
> > Your assumption (speed issue) most probably right. It happened to me
> > with a new “Gemalto .NET v2.0” card which has baud rates up to
> > 223kbps.  Would the simtrace device give me the transfer rate? How
> > would you suggest to measure it?
> 
> If you look at the serial console, it should even tell you the
> negotiated PPS settings.  So far there is no code to export this via USB
> t othe host PC, as far as I remember.  However, it would be simple to
> add it in case you don't happen to have a matching serial cable.  Please
> let me know.

I've quickly implemented this, but don't have time to test it right now.

Please update your simtrace host utility to rev.
b14d0ad2792d3f76ec21e141229840c736a2f23c or later, and use firmware
4f7ca20bf40b911c035264d86ef0359d20e7ac88 or later.  I've attached a
firmware image (for dfu-util flashing) for your reference.

The simtrace program on the host pc should print something like
PPS(Fi=X/Di=Y) once a PPS happens, using the values that were obtained
from the acual PPS sniffing.

Regards,
	Harald

-- 
- Harald Welte <laforge at gnumonks.org>           http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
                                                  (ETSI EN 300 175-7 Ch. A6)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: main_simtrace.bin
Type: application/octet-stream
Size: 20856 bytes
Desc: not available
URL: <http://lists.osmocom.org/pipermail/simtrace/attachments/20120212/67fea41e/attachment.bin>