Quectel EC25-J Dial up failure

[Mashkur Ahmad]

Hi All,
i found the problem to start the qmi dial up, can someone help me out.


 sudo qmi-network /dev/cdc-wdm0 start
Loading profile at /etc/qmi-network.conf...
    APN: isp.docomoiot.net
    APN user: unset
    APN password: unset
    qmi-proxy: yes
Checking data format with 'qmicli -d /dev/cdc-wdm0 --wda-get-data-format
--device-open-proxy'...
[07 Feb 2019, 09:52:49] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
Device link layer protocol retrieved: raw-ip
Getting expected data format with 'qmicli -d /dev/cdc-wdm0
--get-expected-data-format'...
[07 Feb 2019, 09:52:49] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
Expected link layer protocol retrieved: 802-3
Updating kernel link layer protocol with 'qmicli -d /dev/cdc-wdm0
--set-expected-data-format=raw-ip'...
[07 Feb 2019, 09:52:49] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
error: cannot set expected data format: Expected data format not updated
properly to 'raw-ip': got '802-3' instead
Error updating kernel link layer protocol
Starting network with 'qmicli -d /dev/cdc-wdm0 --wds-start-network=apn='
isp.docomoiot.net'  --client-no-release-cid --device-open-proxy'...
[07 Feb 2019, 09:52:49] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
error: couldn't start network: QMI protocol error (26): 'NoEffect'
Saving state at /tmp/qmi-network-state-cdc-wdm0... (CID: 20)
error: network start failed, no packet data handle
[07 Feb 2019, 09:52:49] -Warning ** [/dev/cdc-wdm0] requested auto mode but
no MBIM QMUX support available
Clearing state at /tmp/qmi-network-state-cdc-wdm0...

Thanks
Mashur Khadmi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/qc-linux-modems/attachments/20190207/75e40aba/attachment.htm>