From alberto.alletto at alice.it Fri Apr 9 16:33:10 2021 From: alberto.alletto at alice.it (alberto.alletto at alice.it) Date: Fri, 9 Apr 2021 18:33:10 +0200 (CEST) Subject: problem to install gr-osmosdr Message-ID: <178b77af0d1.alberto.alletto@alice.it> Hi to all!I'm new on ubuntu world...but I need to install gnuradio .. I am following a guide: sudo apt-get install python3-pip sudo pip3 install pybombs pybombs auto-config pybombs recipes add-defaults pybombs prefix init ~/prefix-3.8 -R gnuradio-default source ~/prefix-3.8/setup_env.sh ....and that is all fine. Finally I installed gr-osmosdr: pybombs install gr-osmosdr but i have a problem: ... Clone in 'gr-iqbal' in corso... Configuring: (100%) [=========================================================] [WARNING] Configuration failed. Re-trying with higher verbosity. CMake Error at CMakeLists.txt:32 (find_package): Could not find a configuration file for package "Gnuradio" that is compatible with requested version "3.9". The following configuration files were considered but not accepted: /home/alberto/prefix-3.8/lib/cmake/gnuradio/GnuradioConfig.cmake, version: 3.8.3.git .... -- Configuring incomplete, errors occurred! See also "/home/alberto/prefix-3.8/src/gr-iqbal/build/CMakeFiles/CMakeOutput.log". [ERROR] Configuration failed after running at least twice. [ERROR] Problem occurred while building package gr-iqbal: Configuration failed [ERROR] Error installing package gr-iqbal. Aborting. alberto at alberto-Studio-XPS-1340:~$ How i can solve this problem ? tnx, Alberto Entire process: alberto at alberto-Studio-XPS-1340:~$ pybombs install gr-osmosdr [INFO] Prefix Python version is: 3.8.5 [INFO] PyBOMBS Version 2.3.4 [INFO] Phase 1: Creating install tree and installing binary packages: [INFO] Executing command with elevated privileges: `sudo -H apt-get -y install libhidapi-dev' [sudo] password di alberto: Lettura elenco dei pacchetti... Fatto Generazione albero delle dipendenze Lettura informazioni sullo stato... Fatto I seguenti pacchetti aggiuntivi saranno inoltre installati: libhidapi-hidraw0 libhidapi-libusb0 I seguenti pacchetti NUOVI saranno installati: libhidapi-dev libhidapi-hidraw0 libhidapi-libusb0 0 aggiornati, 3 installati, 0 da rimuovere e 11 non aggiornati. ? necessario scaricare 47,8 kB di archivi. Dopo quest'operazione, verranno occupati 197 kB di spazio su disco. Scaricamento di:1 http://it.archive.ubuntu.com/ubuntu focal/universe amd64 libhidapi-libusb0 amd64 0.9.0+dfsg-1 [14,5 kB] Scaricamento di:2 http://it.archive.ubuntu.com/ubuntu focal/universe amd64 libhidapi-hidraw0 amd64 0.9.0+dfsg-1 [10,7 kB] Scaricamento di:3 http://it.archive.ubuntu.com/ubuntu focal/universe amd64 libhidapi-dev amd64 0.9.0+dfsg-1 [22,6 kB] Recuperati 47,8 kB in 0s (199 kB/s) Selezionato il pacchetto libhidapi-libusb0:amd64 non precedentemente selezionato. (Lettura del database... 228510 file e directory attualmente installati.) Preparativi per estrarre .../libhidapi-libusb0_0.9.0+dfsg-1_amd64.deb... Estrazione di libhidapi-libusb0:amd64 (0.9.0+dfsg-1)... Selezionato il pacchetto libhidapi-hidraw0:amd64 non precedentemente selezionato. Preparativi per estrarre .../libhidapi-hidraw0_0.9.0+dfsg-1_amd64.deb... Estrazione di libhidapi-hidraw0:amd64 (0.9.0+dfsg-1)... Selezionato il pacchetto libhidapi-dev:amd64 non precedentemente selezionato. Preparativi per estrarre .../libhidapi-dev_0.9.0+dfsg-1_amd64.deb... Estrazione di libhidapi-dev:amd64 (0.9.0+dfsg-1)... Configurazione di libhidapi-hidraw0:amd64 (0.9.0+dfsg-1)... Configurazione di libhidapi-libusb0:amd64 (0.9.0+dfsg-1)... Configurazione di libhidapi-dev:amd64 (0.9.0+dfsg-1)... Elaborazione dei trigger per libc-bin (2.31-0ubuntu9.2)... Install tree: | \- gr-osmosdr | +- airspy | +- airspyhf | +- osmo-sdr | +- rtl-sdr | +- bladeRF | +- soapysdr | +- gr-iqbal | | | \- libosmo-dsp | +- gr-fcdproplus | \- hackrf [INFO] Phase 1 complete: All binary dependencies installed. [INFO] Phase 2: Recursively installing source packages to prefix: [INFO] Installing package: hackrf warning: nessun commit in comune remote: Enumerating objects: 31, done. remote: Counting objects: 100% (31/31), done. remote: Compressing objects: 100% (29/29), done. remote: Total 14906 (delta 10), reused 16 (delta 2), pack-reused 14875 Ricezione degli oggetti: 100% (14906/14906), 35.98 MiB | 2.53 MiB/s, fatto. Risoluzione dei delta: 100% (10859/10859), fatto. Da https://github.com/mossmann/hackrf * [nuovo branch] OTP_USB_IDs -> hackrf/OTP_USB_IDs * [nuovo branch] grf6011 -> hackrf/grf6011 * [nuovo branch] h1r5 -> hackrf/h1r5 * [nuovo branch] h1r6 -> hackrf/h1r6 * [nuovo branch] h1r7 -> hackrf/h1r7 * [nuovo branch] master -> hackrf/master * [nuovo branch] pre-release -> hackrf/pre-release * [nuovo branch] stdout -> hackrf/stdout * [nuovo branch] transceiver -> hackrf/transceiver * [nuovo tag] 2013.06.1 -> 2013.06.1 * [nuovo tag] cft-milestone-1 -> cft-milestone-1 * [nuovo tag] jawbreaker-20120914 -> jawbreaker-20120914 * [nuovo tag] jawbreaker-20121016 -> jawbreaker-20121016 * [nuovo tag] v2013.07.1 -> v2013.07.1 * [nuovo tag] v2014.04.1 -> v2014.04.1 * [nuovo tag] v2014.08.1 -> v2014.08.1 * [nuovo tag] v2015.07.1 -> v2015.07.1 * [nuovo tag] v2015.07.2 -> v2015.07.2 * [nuovo tag] v2017.02.1 -> v2017.02.1 * [nuovo tag] v2018.01.1 -> v2018.01.1 * [nuovo tag] v2021.03.1 -> v2021.03.1 Clone in 'hackrf' in corso... Configuring: (100%) [=========================================================] Building: (100%) [=========================================================] Installing: (100%) [=========================================================] [INFO] Installation successful. [INFO] Installing package: gr-fcdproplus warning: nessun commit in comune remote: Enumerating objects: 5, done. remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 100% (5/5), done. remote: Total 515 (delta 0), reused 5 (delta 0), pack-reused 510 Ricezione degli oggetti: 100% (515/515), 244.33 KiB | 919.00 KiB/s, fatto. Risoluzione dei delta: 100% (287/287), fatto. Da https://github.com/dl1ksv/gr-fcdproplus * [nuovo branch] 3.6 -> gr-fcdproplus/3.6 * [nuovo branch] gnuradio3.7 -> gr-fcdproplus/gnuradio3.7 * [nuovo branch] gnuradio3.8 -> gr-fcdproplus/gnuradio3.8 * [nuovo branch] hid-usb -> gr-fcdproplus/hid-usb * [nuovo branch] master -> gr-fcdproplus/master * [nuovo tag] fcdproplus-0.1.0 -> fcdproplus-0.1.0 * [nuovo tag] v3.6 -> v3.6 * [nuovo tag] v3.7 -> v3.7 * [nuovo tag] v3.7.12 -> v3.7.12 * [nuovo tag] v3.7.2-rc1 -> v3.7.2-rc1 * [nuovo tag] v3.7_hidraw -> v3.7_hidraw * [nuovo tag] with_hidapi -> with_hidapi Clone in 'gr-fcdproplus' in corso... Configuring: (100%) [=========================================================] Building: (100%) [=========================================================] Installing: (100%) [=========================================================] [INFO] Installation successful. [INFO] Installing package: libosmo-dsp Da https://git.osmocom.org/libosmo-dsp * [nuovo branch] master -> libosmo-dsp/master * [nuovo tag] 0.4.0 -> 0.4.0 * [nuovo tag] 0.3.0 -> 0.3.0 Clone in 'libosmo-dsp' in corso... Configuring: (100%) [=========================================================] Building: (100%) [=========================================================] Installing: (100%) [=========================================================] [INFO] Installation successful. [INFO] Installing package: gr-iqbal Da https://git.osmocom.org/gr-iqbal * [nuovo branch] gr3.6 -> gr-iqbal/gr3.6 * [nuovo branch] gr3.7 -> gr-iqbal/gr3.7 * [nuovo branch] gr3.8 -> gr-iqbal/gr3.8 * [nuovo branch] master -> gr-iqbal/master * [nuovo tag] v0.37.3 -> v0.37.3 * [nuovo tag] v0.38.2 -> v0.38.2 * [nuovo tag] v0.36.0 -> v0.36.0 * [nuovo tag] v0.37.0 -> v0.37.0 * [nuovo tag] v0.37.1 -> v0.37.1 * [nuovo tag] v0.37.2 -> v0.37.2 * [nuovo tag] v0.38.0 -> v0.38.0 * [nuovo tag] v0.38.1 -> v0.38.1 Clone in 'gr-iqbal' in corso... Configuring: (100%) [=========================================================] [WARNING] Configuration failed. Re-trying with higher verbosity. CMake Error at CMakeLists.txt:32 (find_package): Could not find a configuration file for package "Gnuradio" that is compatible with requested version "3.9". The following configuration files were considered but not accepted: /home/alberto/prefix-3.8/lib/cmake/gnuradio/GnuradioConfig.cmake, version: 3.8.3.git -- Configuring incomplete, errors occurred! See also "/home/alberto/prefix-3.8/src/gr-iqbal/build/CMakeFiles/CMakeOutput.log". [ERROR] Configuration failed after running at least twice. [ERROR] Problem occurred while building package gr-iqbal: Configuration failed [ERROR] Error installing package gr-iqbal. Aborting. alberto at alberto-Studio-XPS-1340:~$ -------------- next part -------------- An HTML attachment was scrubbed... URL: From cinaed.simson at gmail.com Fri Apr 9 18:28:13 2021 From: cinaed.simson at gmail.com (Cinaed Simson) Date: Fri, 9 Apr 2021 11:28:13 -0700 Subject: problem to install gr-osmosdr In-Reply-To: <178b77af0d1.alberto.alletto@alice.it> References: <178b77af0d1.alberto.alletto@alice.it> Message-ID: Hi Alberto - actually, everything will work at the moment without gr-iqbal. Type ?? gnuradio-config-info -v and post the output on this mailing list. The reason gr-iqbal failed is because gr-iqbal thinks you install gnuradio-3.9? instead of gnuradio-3.8. -- Cinaed From alberto.alletto at alice.it Sat Apr 10 09:30:15 2021 From: alberto.alletto at alice.it (alberto.alletto at alice.it) Date: Sat, 10 Apr 2021 11:30:15 +0200 (CEST) Subject: R: Re: problem to install gr-osmosdr Message-ID: <178bb1e1868.alberto.alletto@alice.it> Tnx for your help.Before your reply i have used this command: alberto at alberto-Studio-XPS-1340:~$ pybombs prefix init ~/prefix-3.9 -R gnuradio-defaultalberto at alberto-Studio-XPS-1340:~$ pybombs install gr-osmosdr[INFO] Prefix Python version is: 3.8.5 [INFO] PyBOMBS Version 2.3.4 [INFO] Phase 1: Creating install tree and installing binary packages: Install tree: | \- gr-osmosdr | +- gr-fcdproplus | +- bladeRF | +- airspyhf | +- hackrf | +- gr-iqbal | | | \- libosmo-dsp | +- airspy | +- soapysdr | +- rtl-sdr | \- osmo-sdr [INFO] Phase 1 complete: All binary dependencies installed. [INFO] Phase 2: Recursively installing source packages to prefix: [INFO] Installing package: osmo-sdr fatal: impossibile accedere a 'https://git.osmocom.org/osmo-sdr/': Failed to connect to git.osmocom.org port 443: Connessione scaduta error: Impossibile recuperare osmo-sdr [ERROR] Unexpected error while fetching git+https://git.osmocom.org/osmo-sdr. [ERROR] Command '['git', 'remote', 'update', 'osmo-sdr']' returned non-zero exit status 1. [ERROR] Problem occurred while building package osmo-sdr: Unable to fetch recipe osmo-sdr [ERROR] Error installing package osmo-sdr. Aborting. So...another problem ....: [INFO] Installing package: osmo-sdr fatal: impossibile accedere a 'https://git.osmocom.org/osmo-sdr/': Failed to connect to git.osmocom.org port 443: Connessione scaduta error: Impossibile recuperare osmo-sdr [ERROR] Unexpected error while fetching git+https://git.osmocom.org/osmo-sdr. [ERROR] Command '['git', 'remote', 'update', 'osmo-sdr']' returned non-zero exit status 1. [ERROR] Problem occurred while building package osmo-sdr: Unable to fetch recipe osmo-sdr [ERROR] Error installing package osmo-sdr. Aborting. ----Messaggio originale---- Da: cinaed.simson at gmail.com Data: 9-apr-2021 20.28 A: Ogg: Re: problem to install gr-osmosdr Hi Alberto - actually, everything will work at the moment without gr-iqbal. Type gnuradio-config-info -v and post the output on this mailing list. The reason gr-iqbal failed is because gr-iqbal thinks you install gnuradio-3.9 instead of gnuradio-3.8. -- Cinaed -------------- next part -------------- An HTML attachment was scrubbed... URL: From cinaed.simson at gmail.com Sun Apr 11 09:00:39 2021 From: cinaed.simson at gmail.com (Cinaed Simson) Date: Sun, 11 Apr 2021 02:00:39 -0700 Subject: R: Re: problem to install gr-osmosdr In-Reply-To: <178bb1e1868.alberto.alletto@alice.it> References: <178bb1e1868.alberto.alletto@alice.it> Message-ID: <921030c7-2f03-1dc1-5931-73dec3f19eea@gmail.com> If you need to use gr-osmosdr and gr-iqbal, you need to install gnuradio-3.8 because those packages do not support gnuardio-3.9 yet. Version 3.9 is the "bleeding edge". I've never used pybombs to install software - I just use git - but you need to tell pybombs you want to install gnuradio 3.8. If you ask on the gnuradio mailing list, they can tell you how? to force pybombs to install version 3.8. Alternatively, if you're running Ubuntu 20, I believe you can install the Ubuntu version by typing ? apt install gnuradio which will install version 3.8. -- Cinaed On 4/10/21 2:30 AM, alberto.alletto at alice.it wrote: > Tnx for your help. > Before your reply i have used this command: > > alberto at alberto-Studio-XPS-1340:~$ pybombs prefix init ~/prefix-3.9 -R > gnuradio-default > alberto at alberto-Studio-XPS-1340:~$ pybombs install gr-osmosdr > [INFO] Prefix Python version is: 3.8.5 > [INFO] PyBOMBS Version 2.3.4 > [INFO] Phase 1: Creating install tree and installing binary packages: > Install tree: > | > \- gr-osmosdr > ?? | > ?? +- gr-fcdproplus > ?? | > ?? +- bladeRF > ?? | > ?? +- airspyhf > ?? | > ?? +- hackrf > ?? | > ?? +- gr-iqbal > ?? |? | > ?? |? \- libosmo-dsp > ?? | > ?? +- airspy > ?? | > ?? +- soapysdr > ?? | > ?? +- rtl-sdr > ?? | > ?? \- osmo-sdr > [INFO] Phase 1 complete: All binary dependencies installed. > [INFO] Phase 2: Recursively installing source packages to prefix: > [INFO] Installing package: osmo-sdr > fatal: impossibile accedere a 'https://git.osmocom.org/osmo-sdr/': > Failed to connect to git.osmocom.org port 443: Connessione scaduta > error: Impossibile recuperare osmo-sdr > [ERROR] Unexpected error while fetching > git+https://git.osmocom.org/osmo-sdr. > [ERROR] Command '['git', 'remote', 'update', 'osmo-sdr']' returned > non-zero exit status 1. > [ERROR] Problem occurred while building package osmo-sdr: > Unable to fetch recipe osmo-sdr > [ERROR] Error installing package osmo-sdr. Aborting. > > > So...another problem ....: > [INFO] Installing package: osmo-sdr > fatal: impossibile accedere a 'https://git.osmocom.org/osmo-sdr/': > Failed to connect to git.osmocom.org port 443: Connessione scaduta > error: Impossibile recuperare osmo-sdr > [ERROR] Unexpected error while fetching > git+https://git.osmocom.org/osmo-sdr. > [ERROR] Command '['git', 'remote', 'update', 'osmo-sdr']' returned > non-zero exit status 1. > [ERROR] Problem occurred while building package osmo-sdr: > Unable to fetch recipe osmo-sdr > [ERROR] Error installing package osmo-sdr. Aborting. > > > > > ----Messaggio originale---- > Da: cinaed.simson at gmail.com > Data: 9-apr-2021 20.28 > A: > Ogg: Re: problem to install gr-osmosdr > > Hi Alberto - actually, everything will work at the moment without > gr-iqbal. > > Type > > ?? gnuradio-config-info -v > > and post the output on this mailing list. > > The reason gr-iqbal failed is because gr-iqbal thinks you install > gnuradio-3.9? instead of gnuradio-3.8. > > -- Cinaed > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: