This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Cinaed Simson cinaed.simson at gmail.comThere are a number of forks of rtl-sdr, but the one I use is from https://github.com/osmocom/rtl-sdr.git which has support for the bias tee. I'm not familiar with the git URLs you posted. When I built it from source I get everything - the binaries, the includes and the libraries. And rtl_fm worked. As long as you don't randomly mix the source for the rtl-sdr and the source for the librtlsdr from different forks it shouldn't matter. -- Cinaed On 11/18/2017 04:09 PM, vk4tec at tech-software.net wrote: > Hello > > I am installing a satgate on the raspberry pi with an rtl dongle > > I use the rtl_fm from the sources and I get an error about bias tee > > I have had to use another source > > Here is my install script > > #!/bin/sh > clear > echo "VK4TEC SATGATE install" > echo " " > #sudo apt-get update > #sudo apt-get install cmake build-essential libusb-1.0-0-dev > git clone https://github.com/niofis/rtl-sdr.git > cd rtl-sdr/ > mkdir build > cd build > cmake ../ > make > sudo make install > sudo ldconfig > git clone https://www.github.com/wb2osz/direwolf > cd ~/direwolf > make > sudo make install > make install-rpi > make install-conf > cd ~ > sudo mv sdr.old sdr.confcd ~ > sudo cp sdr.conf sdr.old > cd ~ > sudo apt-get uninstall rtl-sdr > sudo apt-get install rtl-sdr > sudo apt-get install librtlsdr-dev > /usr/bin/rtl_fm -f 145.825M - | direwolf -t 0 -dii -c sdr.conf -r 24000 -D 1 > - > > Andrew Rich Nov 2017 > >