This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Favati smile_k at libero.itIl 03/05/2013 01:57, Simon PurplePlaNET ha scritto: > Hi folks, > > I've been messing around with rtl_tcp and an RTL2832 device on a Raspberry Pi and want to add a bank of front end filters and a LNA that can be controlled by the GPIO. > > I want to allow manual control of the signal path via a web page hosted on the Pi, but also want to be able to have the filters selected automatically based on the frequency that the RTL device is tuned to. > > I noticed that rtl_tcp helpfully echos the frequency changes to the console, so I wrote a simple shell script to gather this data and control the GPIO. > > Somebody may have already done this and there is probably a better way to achieve it but, if this would be of any use to you, please feel free to copy and use as you wish. > > http://www.purpleplanet.org/?q=rtl-robot > > Cheers, > > Simon > > > Great job! I wrote an external program to control gpio, i'll try to implement your solution! Many thanks!