This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
IZ8MBW Fabio iz8mbw at yahoo.itHi. Now it works!!! The procedure is to: 1. add the line: blacklist dvb_usb_rtl28xxu into the file /etc/modprobe.d/raspi-blacklist.conf 2. reboot Many thanks! A question: there is a way to start "rtp_tcp" in silent mode (without messages on the terminal)? Thanks! 73 Fabio, IZ8MBW www.iz8mbw.net >________________________________ > Da: András Retzler <retzlerandras at gmail.com> >A: IZ8MBW Fabio <iz8mbw at yahoo.it>; osmocom-sdr at lists.osmocom.org >Inviato: Lunedì 23 Dicembre 2013 13:46 >Oggetto: Re: RTL2832U on Raspberry Pi > > > >Hi Fabio, > > >I think you should run the following before running any rtl_* commands: >sudo rmmod dvb_usb_rtl28xxu > > >You may also blacklist the dvb_usb_rtl28xxu kernel module, so it won't load when you plug in the RTL device. > > >73! > > >Andras, HA7ILM > > > > > >2013/12/23 IZ8MBW Fabio <iz8mbw at yahoo.it> > >Hi. >>I'm trying to install OSMOSdr on a Raspberry Pi. >>I'm following this guide: http://www.hamradioscience.com/raspberry-pi-as-remote-server-for-rtl2832u-sdr/ >> >> >>After installing I try to test the RTL2832 USB SDR but I have this error: >> >> >>root at raspberrypi:~/rtl2832/rtl-sdr/build# rtl_test >>Found 1 device(s): >> 0: Generic RTL2832U OEM >> >> >>Using device 0: Generic RTL2832U OEM >> >> >>Kernel driver is active, or device is claimed by second instance of librtlsdr. >>In the first case, please either detach or blacklist the kernel module >>(dvb_usb_rtl28xxu), or enable automatic detaching at compile time. >> >> >>usb_claim_interface error -6 >>Failed to open rtlsdr device #0. >> >> >> >> >>This is my lsmod: >> >> >> >>root at raspberrypi:~# lsmod >>Module Size Used by >>tun 18459 2 >>i2c_dev 5557 0 >>w1_therm 2921 0 >>w1_gpio 2363 0 >>wire 24832 2 w1_gpio,w1_therm >>cn 4783 1 wire >>snd_bcm2835 16165 0 >>evdev 9419 1 >>r820t 16279 1 >>rtl2832 8020 1 >>snd_soc_bcm2708_i2s 5474 0 >>regmap_mmio 2806 1 snd_soc_bcm2708_i2s >>dvb_usb_rtl28xxu 14333 0 >>dvb_usb_v2 14860 1 dvb_usb_rtl28xxu >>rc_core 16313 3 dvb_usb_rtl28xxu,dvb_usb_v2 >>rtl2830 7378 1 dvb_usb_rtl28xxu >>snd_soc_core 131268 1 snd_soc_bcm2708_i2s >>dvb_core 92797 3 rtl2830,rtl2832,dvb_usb_v2 >>regmap_spi 1897 1 snd_soc_core >>snd_pcm 81593 2 snd_bcm2835,snd_soc_core >>snd_page_alloc 5156 1 snd_pcm >>regmap_i2c 1645 1 snd_soc_core >>snd_compress 8076 1 snd_soc_core >>snd_seq 53769 0 >>snd_timer 20133 2 snd_pcm,snd_seq >>snd_seq_device 6473 1 snd_seq >>leds_gpio 2059 0 >>led_class 3688 1 leds_gpio >>snd 61291 7 snd_bcm2835,snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_seq_device,snd_compress >>i2c_bcm2708 3949 0 >> >> >> >> >>This is a portion of /var/log/messages >> >> >>. >>. >> >>. >>Dec 23 13:15:06 raspberrypi kernel: [ 2.369348] usb 1-1: new high-speed USB device number 2 using dwc_otg >>Dec 23 13:15:06 raspberrypi kernel: [ 2.377867] Indeed it is in host mode hprt0 = 00001101 >>Dec 23 13:15:06 raspberrypi kernel: [ 2.387121] devtmpfs: mounted >>Dec 23 13:15:06 raspberrypi kernel: [ 2.399736] Freeing unused kernel memory: 144K (c0572000 - c0596000) >>Dec 23 13:15:06 raspberrypi kernel: [ 2.590087] usb 1-1: New USB device found, idVendor=0424, idProduct=9512 >>Dec 23 13:15:06 raspberrypi kernel: [ 2.599431] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >>Dec 23 13:15:06 raspberrypi kernel: [ 2.609377] hub 1-1:1.0: USB hub found >>Dec 23 13:15:06 raspberrypi kernel: [ 2.615786] hub 1-1:1.0: 3 ports detected >>Dec 23 13:15:06 raspberrypi kernel: [ 2.899604] usb 1-1.1: new high-speed USB device number 3 using dwc_otg >>Dec 23 13:15:06 raspberrypi kernel: [ 3.009979] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 >>Dec 23 13:15:06 raspberrypi kernel: [ 3.018605] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >>Dec 23 13:15:06 raspberrypi kernel: [ 3.047105] smsc95xx v1.0.4 >>Dec 23 13:15:06 raspberrypi kernel: [ 3.124437] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:30:43:fd >>Dec 23 13:15:06 raspberrypi kernel: [ 3.229549] usb 1-1.3: new high-speed USB device number 4 using dwc_otg >>Dec 23 13:15:06 raspberrypi kernel: [ 3.352535] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=2838 >>Dec 23 13:15:06 raspberrypi kernel: [ 3.365766] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >>Dec 23 13:15:06 raspberrypi kernel: [ 3.375070] usb 1-1.3: Product: RTL2838UHIDIR >>Dec 23 13:15:06 raspberrypi kernel: [ 3.381218] usb 1-1.3: Manufacturer: Realtek >>Dec 23 13:15:06 raspberrypi kernel: [ 3.391654] usb 1-1.3: SerialNumber: 00000001 >>Dec 23 13:15:06 raspberrypi kernel: [ 5.123693] bcm2708_i2c_init_pinmode(0,0) >>Dec 23 13:15:06 raspberrypi kernel: [ 5.249498] bcm2708_i2c_init_pinmode(0,1) >>Dec 23 13:15:06 raspberrypi kernel: [ 5.255625] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k) >>Dec 23 13:15:06 raspberrypi kernel: [ 5.468627] bcm2708_i2c_init_pinmode(1,2) >>Dec 23 13:15:06 raspberrypi kernel: [ 5.545257] bcm2708_i2c_init_pinmode(1,3) >>Dec 23 13:15:06 raspberrypi kernel: [ 5.614064] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k) >>Dec 23 13:15:06 raspberrypi kernel: [ 6.451707] usb 1-1.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state >>Dec 23 13:15:06 raspberrypi kernel: [ 6.510309] usbcore: registered new interface driver dvb_usb_rtl28xxu >>Dec 23 13:15:06 raspberrypi kernel: [ 6.552127] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>Dec 23 13:15:06 raspberrypi kernel: [ 6.575184] DVB: registering new adapter (Realtek RTL2832U reference design) >>Dec 23 13:15:06 raspberrypi kernel: [ 6.614879] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory >>Dec 23 13:15:06 raspberrypi kernel: [ 6.639092] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... >>Dec 23 13:15:06 raspberrypi kernel: [ 6.693199] r820t 2-001a: creating new instance >>Dec 23 13:15:06 raspberrypi kernel: [ 6.721703] r820t 2-001a: Rafael Micro r820t successfully identified >>Dec 23 13:15:06 raspberrypi kernel: [ 6.744416] Registered IR keymap rc-empty >>Dec 23 13:15:06 raspberrypi kernel: [ 6.755520] input: Realtek RTL2832U reference design as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/rc/rc0/input0 >>Dec 23 13:15:06 raspberrypi kernel: [ 6.785036] rc0: Realtek RTL2832U reference design as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/rc/rc0 >>Dec 23 13:15:06 raspberrypi kernel: [ 6.808934] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 400 msecs >>Dec 23 13:15:06 raspberrypi kernel: [ 6.840041] usb 1-1.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected >>Dec 23 13:15:06 raspberrypi kernel: [ 10.489768] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) >>Dec 23 13:15:06 raspberrypi kernel: [ 10.929880] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) >>. >>. >>. >> >> >>Any idea to how to solve? >>Many thanks!! >> >> >> >>73 >>Fabio, IZ8MBW >>www.iz8mbw.net >> >> > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/osmocom-sdr/attachments/20131223/c6ee3bda/attachment.htm>