This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Ben Wojtowicz bwojtowi at gmail.comDimitri, Thanks for the example code! I'll roll this into the next release. Thanks, Ben On Sun, Aug 4, 2013 at 10:36 AM, Dimitri Stolnikov <horiz0n at gmx.net> wrote: > Hi Ben, > > > I have released openLTE V00.08.03 (http://sourceforge.net/** >> projects/openlte/ <http://sourceforge.net/projects/openlte/>) >> with support for HackRF and RTL-SDR via GrOsmoSDR. Using this release, I >> have been able to successfully decode broadcast information (MIB and SIBs) >> from LTE networks. >> > > Thanks for the update & congratulations! > > > I was also wondering if there is a good way to determine which type of >> hardware is connected? >> > > Ideally you enumerate through available devices and select one to work > with (example attached). Then you pass it's device string to the > source/sink and continue from there as usual. You can check for something > like dev.count("rtl") || dev.count("rtl_tcp") and dev.count("hackrf") to > distinguish between devices. In our applications we also provide a command > line switch like > > parser.add_option("-a", "--args", type="string", default="", > help="Device args, [default=%default]") > > to select a specific device via CLI and to be able to change it's default > parameters: -a "hackrf,buffers=128". > > > Best regards, > Dimitri -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/osmocom-sdr/attachments/20130804/70aabec1/attachment.htm>