This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-sdr@lists.osmocom.org/.
Per Baekgaard baekgaard at b4net.dkThanks for your reply, Stefan. You wrote: > mine goes up till almost 1.9GHz with no harm. Mine does go up there around too, if I'm using your repository. I've also had a look at your code, and I can see you have removed the same lines of code too. However, when I build it here and install it on my machine, there is a big difference in the performance -- for instance, tuning to some of the lower bands (just try 24 MHz) shows a lot of spikes/spurs that are not present when using the "official" repository, even though the settings are the same in the testing application (in this case gqrx). Not sure why, though -- did you change the gain parameters somehow? If not, then there might possible be some bugs introduced that are causing the spurs? They seem to be somewhat stable in the spectrum, despite the tuned-to frequency. -- Per.