This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.
gitosis at osmocom.org gitosis at osmocom.orgThis is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "OpenBTS' transceiver retro-fit".
The branch, master has been updated
via 78e1cd20e2690f59c4ddee8faeeff98edbe5685c (commit)
via db9c1b54cb45f0b4636647a1bc6778c9d39e1de7 (commit)
from 099a44abfbe9f573ae553ba24945ef452c9982b8 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://cgit.osmocom.org/osmo-trx/commit/?id=78e1cd20e2690f59c4ddee8faeeff98edbe5685c
commit 78e1cd20e2690f59c4ddee8faeeff98edbe5685c
Author: Harald Welte <laforge at gnumonks.org>
Date: Sat Oct 28 17:52:32 2017 +0200
Tag/Release 0.2.0
This is the first real tagged Osmocom release of OsmoTRX.
[ Alexander Chemeris ]
* EDGE: Add support for UmTRX.
* Common: Get rid of a compilation warning.
* Common: Make sure gLogEarly() log to the same facilities as the normal log.
* transceiver: Properly handle MAXDLY.
* transceiver: Add an option to generate random Access Bursts.
* osmo-trx: Output Rx SPS as a part of configuration output.
* transceiver: Do not pass transceiver state struct to function where it's not used.
* makefile: Fix build from an external path.
* radioDevice: GSMRATE macro must have parentheses around its definition.
* uhd: Fix comment.
* radioInterface: Initialize power scale with a meaningful default.
* transceiver: Log channel number in DEBUG output of demoded bursts.
* transceiver: Add an option to emulate a RACH delay in random filler mode.
* UHD: Initial LimeSDR support.
* CommonLibs: Remove unused files.
* sigProcLib: Typo sybols -> symbols
* radioBuffer: Remove extra ; at the end of inline function definitions.
* sigProcLib: Fix documentation, sync argument names in .cpp and .h files.
* sigProcLib: make energyDetect() simpler by returning actual energy.
* sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity.
* sigProcLib: Slice SoftVector instead of signalVector for GMSK demod.
* Call vectorSlicer() right before packing bits for transmission to osmo-bts.
* CommonLibs: Print soft bits with less confidence to console when printing a soft vector.
* BitVector: Remove convolutional codec - we don't use it in osmo-trx.
* BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits.
* signalVector: Implement segment().
* vector: Introduce segmentMove() method to move data inside of a vector.
* vector: Introduce shrink() function to shrink vector size without loosing data.
* Move CorrType type from Transceiver to sigProcLib.
* sigProcLib: rename signalError type to SignalError.
* Move Transceiver::detectBurst() to sigProcLib to make it reusable.
* Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable.
* sigProcLib: Add operator<< to print CorrType to a string.
* sigProcLib.h: Fix whitespaces. No non-whitespace changes.
* Move Transceiver::demodulate() to sigProcLib to make it reusable.
* sigProcLib: constify signalVector arguments for detectBurst() functions.
* sigProcLib: Constify demodulation functions burst argument.
* sigProcLib: Fix number of tail bits in random Normal Bursts and zero Stealing Bits.
* Configuration: Variables allocated with 'new' must be freed with 'delete'.
* BitVector: Remove Generator class.
* PRBS: a Pseudo-random binary sequence (PRBS) generator class.
[ Tom Tsou ]
* EDGE: Fix USRP B210 device support
* uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts
* EDGE: Fix demodulation slicer input
* common: Restrict UDP binding to localhost only
* common: Add mandatory length field to UDP receive calls
* uhd: Update default E3XX settings
* uhd: Set default Tx sampling to 4 sps
* uhd: Make device offset check a private method
* uhd: Set minimum UHD version requirement for E3XX
* sigproc: Expand RACH, TSC, and EDGE correlation windows
* transceiver: Do not report error on SETTSC when radio is on
* transceiver: Add Rx samples-per-symbol option
* radioInterface: Convert diversity argument to general type
* iface: Add inner ring-buffer implementation
* mcbts: Add multi-ARFCN channelizing filters
* mcbts: Add multi-ARFCN radio support
* sigproc: Adjust burst detection threshold criteria
* egprs: Enable 8-PSK length vectors on the Tx interface
* egprs: Enable 8-PSK burst detection when EDGE is enabled
* transceiver: Remove HANDOVER warnings
* mcbts: Allow out of order channel setup
* radioInterface: Fix multi-channel buffer index bug
* uhd: Add command line option for GPS reference
* transceiver: Fix mixed GSMK / 8-PSK transmission
* transceiver: Fix 4 SPS receive TOA value
* sigproc: Fix missing 8-PSK tail symbols
* uhd: Update USRP2/N200/N210 for 4 SPS Rx
* sigproc: Match differential GMSK start/end bits to tail bits
* uhd: Add missing B200 sample timing for 4 SPS receive
* transceiver: Fix command build warning
* uhd: Set minimum supported version to 3.9.0
* uhd: Add X300 sample timing for 4 SPS
* Revert "uhd: Set minimum supported version to 3.9.0"
* uhd: Add support for UHD-3.11 logging control
* uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz
* Resampler: Fix initialization return checking
* sigProcLib: Remove unreachable code and no-effect checks
* sigProcLib: Check return status on downsampling
* sigProcLib: Fix negative value check on unsigned value
* Resampler: Fix non-array delete for filter taps
* Transceiver: Remove unsigned negative compares
* Configuration: Fix const and signedness compile warnings
* config: Remove OpenBTS style sqlite configuration
* radioInterface: Remove UmTRX 'diversity' option
* build: Require and check for gcc C++11 support
* uhd: Use map container for for device parameter access
* sigProcLib: Remove unused functions from public interface
* uhd: Add non-UmTRX channel swap support
* uhd: Fix Tx-RX timing offset setting
* uhd: Fix USRP2/N200/N210 device detection
* transceiver: Fix POWEROFF crash on USRP2/N200/X300 devices
* sigProcLib: Fix complex/real vector flag in Laurent modulator
* sigProcLib: Remove heap based signal vector allocations
* common: Declare explicit Vector move constructor
* sigProcLib: Remove trigonometric tables
* sigProcLib: Use explicit NaN check in sinc table generation
* sigProcLib: Replace dynamically allocated resampling buffers
* sigProcLib: Specify standard namespace for isnan()
* uhd: Always specify samples-per-symbol for device lookup
* LimeSDR: set approximate tx offset value to make GSM work
[ Neels Hofmeyr ]
* add basic .gitignore
* configure.ac: check for boost/config.hpp header
* The INSTALL file is being overwritten by autoreconf, but it is committed as empty file. As a result, the INSTALL file always shows as modified. Instead, remove INSTALL from git and ignore it.
* add contrib/jenkins.sh, for gerrit build bot
[ pierre.baudry ]
* transceiver: Fix mismatched allocations and deallocations
[ Holger Hans Peter Freyther ]
* debian: Require fftw3 header files for osmo-trx
[ Max ]
* Add gerrit settings
* Integrate Debian packaging changes
* Remove embedded sqlite3
* Fix building against sqlite3
* Add autoconf-archive to dependencies
* debian: remove obsolete dependency
* deb: remove unused dependency
* Remove redundant explicit dependency
* Use release helper from libosmocore
[ Ruben Undheim ]
* Do not embed sqlite3 when building
[ Philipp Maier ]
* buildenv: Turn off native architecture builds
* cosmetic: Make parameter lists uniform
* Add test program to verify convolution implementation
* ssedetect: Add runtime CPU detection
* cosmetic: remove code duplication
* buildenv: Make build CPU invariant
* buildenv: Split up SSE3 and SSE4.1 code
* cosmetic: Add info about SSE support
[ Vadim Yanitskiy ]
* buildenv: correct the ax_sse macro description
* buildenv: actually strip unused cpuid functionality
* buildenv: fix build on systems without SIMD support
* buildenv: cosmetic changes
* buildenv: check for __builtin_cpu_supports call support
* ssedetect: call __builtin_cpu_supports() only if supported
[ Pau Espin Pedrol ]
* cosmetic: transciever: Remove trailing whitespaces
* transceiver: Avoid sending clock indications when trx is not powered on
* Add -j option to bind to specific address
[ ignasj ]
* LimeSDR: Change device detection to work with USB and PCIe versions
* LimeSDR: change tx window type to TX_WINDOW_FIXED
* LimeSDR: Fix sample value range
[ Harald Welte ]
* Add '-t' command line option to enable SCHED_RR
* Import git-version-gen and update AC_INIT()
Change-Id: Ibf3be6cc25e9b20d625b1f67972114b7f613f05c
http://cgit.osmocom.org/osmo-trx/commit/?id=db9c1b54cb45f0b4636647a1bc6778c9d39e1de7
commit db9c1b54cb45f0b4636647a1bc6778c9d39e1de7
Author: Harald Welte <laforge at gnumonks.org>
Date: Sat Oct 28 17:49:36 2017 +0200
Import git-version-gen and update AC_INIT()
In AC_INIT(), it still stated openbts. Let's clean this up and use
the same method of version generation that we use in all other osmocom
projects, too.
Change-Id: Ie7ae0585955aebdc3950b1dd8bff0d1fff3be212
-----------------------------------------------------------------------
Summary of changes:
configure.ac | 4 +-
debian/changelog | 167 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
git-version-gen | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 321 insertions(+), 1 deletion(-)
create mode 100755 git-version-gen
hooks/post-receive
--
OpenBTS' transceiver retro-fit