This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.
gitosis at osmocom.org gitosis at osmocom.orgThis is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "OpenBTS' transceiver retro-fit". The branch, master has been updated via a93f789e50e9fc4fd7bcf7d7bc6e2cd31cc1e042 (commit) from 72bf762b42571998e353c298691d74d7ce897bdc (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-trx/commit/?id=a93f789e50e9fc4fd7bcf7d7bc6e2cd31cc1e042 commit a93f789e50e9fc4fd7bcf7d7bc6e2cd31cc1e042 Author: Tom Tsou <tom.tsou at ettus.com> Date: Tue Mar 7 17:54:06 2017 -0800 uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz Addresses following issues where UHD 3.9 and likely other UHD versions would report a master clock (FPGA) rate error. Update MC-BTS FPGA clock for B200 and B210 to 51.2 MHz, which is supported by all UHD versions. Only B200/B210 is supported for MC-BTS operation. https://osmocom.org/issues/1963 https://osmocom.org/issues/1648 ALERT UHDDevice.cpp:548:set_master_clk: Failed to set master clock rate ALERT UHDDevice.cpp:549:set_master_clk: Requested clock rate 3.2e+06 ALERT UHDDevice.cpp:550:set_master_clk: Actual clock rate 5e+06 Change-Id: I78fb2c0959abd0e666628ba39f433162aafb067e ----------------------------------------------------------------------- Summary of changes: Transceiver52M/UHDDevice.cpp | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) hooks/post-receive -- OpenBTS' transceiver retro-fit