openbsc.git branch zecke/features/rtp-bridge updated. 0.14.0-153-g212adfa

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/osmocom-commitlog@lists.osmocom.org/.

gitosis at osmocom.org gitosis at osmocom.org
Sun Aug 23 15:33:37 UTC 2015


This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)".

The branch, zecke/features/rtp-bridge has been updated
       via  212adfabc16cc204050f3223257e797185f0acbf (commit)
       via  32cab958f303cdba0f434e414846455eb3c5e50a (commit)
       via  71e12aea4ed1d0b85ad31bf9b30334cc26b24540 (commit)
       via  4c394c5e288592665216e537be4c1335d35c582c (commit)
       via  d5d7ecd7ea830f49d871bf225bfefff982d1d2fb (commit)
      from  14a088a92162fd6abb3031e025ce59fba40af718 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
http://cgit.osmocom.org/openbsc/commit/?id=212adfabc16cc204050f3223257e797185f0acbf

commit 212adfabc16cc204050f3223257e797185f0acbf
Author: Holger Hans Peter Freyther <holger at moiji-mobile.com>
Date:   Sun Aug 23 17:33:21 2015 +0200

    WIP..

http://cgit.osmocom.org/openbsc/commit/?id=32cab958f303cdba0f434e414846455eb3c5e50a

commit 32cab958f303cdba0f434e414846455eb3c5e50a
Author: Holger Hans Peter Freyther <holger at moiji-mobile.com>
Date:   Thu Aug 20 20:29:41 2015 +0200

    amr/bsc: In case a TCH/H is used do not set higher modes
    
    AMR 10.20 and 12.20 can not be used on a TCH/H so do not put
    this into the mode set.

http://cgit.osmocom.org/openbsc/commit/?id=71e12aea4ed1d0b85ad31bf9b30334cc26b24540

commit 71e12aea4ed1d0b85ad31bf9b30334cc26b24540
Author: Holger Hans Peter Freyther <holger at moiji-mobile.com>
Date:   Thu Aug 20 20:01:55 2015 +0200

    amr: Move from having a struct to a length+values for the mr config
    
    In preparation of encoding the hysteris switch from a simple
    mrconfig struct to holding a byte array. This way the hysteris
    can be encoded by the API implementation and the rest of the
    code will use these values.
    
    Based on Adreas's AMR code but I decided to separate the len
    from the value and to not allow different values for MS and
    BTS (the Osmo BTS family doesn't implement the BTS side mode
    switching anyway).

http://cgit.osmocom.org/openbsc/commit/?id=4c394c5e288592665216e537be4c1335d35c582c

commit 4c394c5e288592665216e537be4c1335d35c582c
Author: Holger Hans Peter Freyther <holger at moiji-mobile.com>
Date:   Thu Aug 20 19:32:46 2015 +0200

    amr: Remove some code duplication in preparation
    
    Merge two copies into a local static helper function. The format
    of the message will change and then it is easier to modify it in
    one place than in two.

http://cgit.osmocom.org/openbsc/commit/?id=d5d7ecd7ea830f49d871bf225bfefff982d1d2fb

commit d5d7ecd7ea830f49d871bf225bfefff982d1d2fb
Author: Holger Hans Peter Freyther <holger at moiji-mobile.com>
Date:   Thu Aug 20 19:10:58 2015 +0200

    mncc: Use the default codec from the built-in mncc mode
    
    In case of the RTP bridge mode we need to select the codec
    ourselves. Rely on the same (incomplete) codec selection that
    can be done using the mncc-int configuration node. This might
    gain bearer capabilities support.
    
    In case of a SDCCH a TCH/F will be attempted to be assigned.
    This is an open issue for both modes and there should be a
    preference for full or half-rate channels somewhere.

-----------------------------------------------------------------------

Summary of changes:
 openbsc/include/openbsc/bsc_api.h         |  5 +++--
 openbsc/include/openbsc/gsm_data.h        | 10 ++++++++++
 openbsc/include/openbsc/gsm_data_shared.h |  5 ++++-
 openbsc/include/openbsc/mncc_int.h        |  2 ++
 openbsc/src/libbsc/abis_rsl.c             | 17 ++++++++--------
 openbsc/src/libbsc/bsc_api.c              | 13 ++++++++----
 openbsc/src/libbsc/chan_alloc.c           |  2 +-
 openbsc/src/libbsc/gsm_04_08_utils.c      | 33 +++++++++++--------------------
 openbsc/src/libbsc/handover_logic.c       |  2 +-
 openbsc/src/libmsc/gsm_04_08.c            |  9 +++++----
 openbsc/src/libmsc/mncc_builtin.c         |  9 +++++++--
 openbsc/src/osmo-bsc/osmo_bsc_api.c       | 14 ++++++++++---
 12 files changed, 73 insertions(+), 48 deletions(-)


hooks/post-receive
-- 
The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)



More information about the osmocom-commitlog mailing list