This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
understand that we only have to configure the Unit-id and Oml Address right and I understand that the firmware is already installed . I have tried the following : ipaccess-config -f FIRMWARE -w and sure it doesn't work :) . And I also read the -w argument options that needs to be used to download the firmware from BTS into debian system it should be used with -f . Is it necessary to download it into our linux box or you need to configure it only as it is already installed into BTS from ipaccess company . Thanks, Omar Atia -----Original Message----- From: openbsc-bounces at lists.osmocom.org [mailto:openbsc-bounces at lists.osmocom.org] On Behalf Of Peter Hasse Sent: Wednesday, January 19, 2011 12:14 PM To: openbsc at lists.osmocom.org Subject: Re: How to run openbsc on nanoBTS On 19.01.2011 06:16, Ravi Shankar wrote: > Dear sir Hi Ravi > > I am new to openbsc.I have two NanoBTS(165cu).I'm facing some > difficulty which I'm summarizing below > I'm using Ubuntu10.04 > 1) Can we proceed with one nanobts.? Yes, in fact i would recommend to start with one and if you get familar with openbsc you can add more bts. > 2)I've configured bts ip,unit id, oml ip of one bts.But not able to > get the firmware. Check out ipaccess-config util from the openbts source. You can download the firmware out of the bts you have configured. > How to get it and configure for NanoBTS?? nanoBTS is a different project and based on the USRP. checkout openbts.org to get further informations. > > 3)how to run openbsc ?? http://openbsc.osmocom.org/trac/wiki/BscHack > > Please suggest the procedure to run the openbsc. > > Thanks mfg derPeter