This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sonny Lafuente sonny.lafuente at entropysolution.comHi Community, Does anyone here tried to upgrade the your working OSMO environment to its latest version? I have the experience where I upgraded my working osmo to the latest version and I have encountering some problem between the connection of osmo-nitb and osmo-sip-connector. For the latest sip connector update it will communicate the connection going to osmo-msc. Since I don’t use the osmo-msc instead I am using the osmo-nitb for the standalone project. Below is the error I have experiencing right now in the osmo-sip-connector and osmo-nitb. SIP Connector Logs: <0001> mncc.c:845 Incompatible version(5) expected 6 <0001> mncc.c:936 Reconnected to /tmp/msc_mncc <0001> mncc.c:841 Got hello message version 5 <0001> mncc.c:845 Incompatible version(5) expected 6 <0001> mncc.c:936 Reconnected to /tmp/msc_mncc <0001> mncc.c:841 Got hello message version 5 <0001> mncc.c:845 Incompatible version(5) expected 6 OSMO-NITB Logs: Fri May 29 13:13:16 2020 <0006> mncc_sock.c:84 MNCC Socket has LOST connection Fri May 29 13:13:16 2020 <0001> gsm_04_08.c:463 Clearing all currently active transactions!!! Fri May 29 13:13:21 2020 <0006> mncc_sock.c:271 MNCC Socket has connection with external call control application Fri May 29 13:13:21 2020 <0006> mncc_sock.c:84 MNCC Socket has LOST connection Fri May 29 13:13:21 2020 <0001> gsm_04_08.c:463 Clearing all currently active transactions!!! Here are the configuration file of osmo-nitb and osmo-sip-connector and how we run the command. SIP Connector: Command to run: ./osmo-sip-connector -c ~/osmo-sip-connector.cfg Config File: # sip local 192.168.1.166 5062 remote 192.168.1.166 5060 sofia-sip log-level 2 mncc socket-path /tmp/msc_mncc app OSMO NITB: Command to run: ./osmo-nitb -C -c ~/osmo-nitb.cfg -T -P -l /home/hlr.sqlite3 -M /tmp/msc_mncc Config File: line vty no login ! e1_input e1_line 0 driver ipa e1_line 0 port 0 no e1_line 0 keepalive network network country code 94 mobile network code 1 short name 1 long name 1 auth policy accept-all authorized-regexp .* location updating reject cause 13 encryption a5 0 neci 1 paging any use tch 0 rrlp mode none mm info 1 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3109 1 timer t3105 1 timer t3113 60 timer t3103 1 timer t3122 10 timer t3101 10 dyn_ts_allow_tch_f 0 subscriber-keep-in-ram 1 bts 0 type sysmobts band GSM900 cell_identity 1 location_area_code 1 base_station_id_code 63 ms max power 0 cell reselection hysteresis 4 rxlev access min 0 periodic location update 30 radio-link-timeout 32 channel allocator descending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 early-classmark-sending forbidden ip.access unit_id 1000 0 oml ip.access stream_id 255 line 0 neighbor-list mode automatic codec-support fr hr efr amr amr tch-h modes 0 amr tch-h start-mode auto gprs mode gprs gprs 11bit_rach_support_for_egprs 0 gprs routing area 1 gprs network-control-order nc0 gprs cell bvci 2 gprs cell timer blocking-timer 3 gprs cell timer blocking-retries 3 gprs cell timer unblocking-retries 3 gprs cell timer reset-timer 3 gprs cell timer reset-retries 3 gprs cell timer suspend-timer 10 gprs cell timer suspend-retries 3 gprs cell timer resume-timer 10 gprs cell timer resume-retries 3 gprs cell timer capability-update-timer 10 gprs cell timer capability-update-retries 3 gprs nsei 101 gprs ns timer tns-block 3 gprs ns timer tns-block-retries 3 gprs ns timer tns-reset 3 gprs ns timer tns-reset-retries 3 gprs ns timer tns-test 30 gprs ns timer tns-alive 3 gprs ns timer tns-alive-retries 10 gprs nsvc 0 nsvci 101 gprs nsvc 0 local udp port 23000 gprs nsvc 0 remote udp port 23000 gprs nsvc 0 remote ip 127.0.0.2 gprs nsvc 1 nsvci 0 gprs nsvc 1 local udp port 0 gprs nsvc 1 remote udp port 0 gprs nsvc 1 remote ip 0.0.0.0 no force-combined-si trx 0 rf_locked 0 arfcn 74 nominal power 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 trx 1 rf_locked 0 arfcn 65 nominal power 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 timeslot 1 phys_chan_config TCH/F hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 mncc-int default-codec tch-f fr default-codec tch-h amr nitb subscriber-create-on-demand subscriber-create-on-demand random 100000 199999 no assign-tmsi smpp local-tcp-ip 127.0.0.1 2776 system-id password policy closed smpp-first esme root password password default-route Thank you. Sonny -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20200529/f0a83b3a/attachment.htm>