This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Vadim Yanitskiy axilirator at gmail.comHi again, > Hence, I took a wire shark trace test.pcap. I see ICMP Destination Unreachable messages in your captures: > 3 0.010926 127.0.0.1 → 127.0.0.1 OsmoTRXC 55 CMD POWEROFF > 4 0.010938 127.0.0.1 → 127.0.0.1 ICMP 83 Destination unreachable (Port unreachable) > 145 2.011000 127.0.0.1 → 127.0.0.1 OsmoTRXC 55 CMD POWEROFF > 146 2.011016 127.0.0.1 → 127.0.0.1 ICMP 83 Destination unreachable (Port unreachable) > 185 4.011062 127.0.0.1 → 127.0.0.1 OsmoTRXC 55 CMD POWEROFF > 186 4.011144 127.0.0.1 → 127.0.0.1 OsmoTRXC 57 RSP POWEROFF 0 > 239 18.099625 127.0.0.1 → 127.0.0.1 OsmoTRXC 55 CMD POWEROFF > 240 18.099703 127.0.0.1 → 127.0.0.1 OsmoTRXC 57 RSP POWEROFF 0 > 269 35.349196 127.0.0.1 → 127.0.0.1 OsmoTRXC 55 CMD POWEROFF > 270 35.349271 127.0.0.1 → 127.0.0.1 OsmoTRXC 57 RSP POWEROFF 0 Perhaps you're starting osmo-bts-trx before osmo-trx? Make sure to start osmo-trx first and give it enough time to upload the UHD firmware, unless you see "Transceiver active with X channel(s)". With best regards, Vadim Yanitskiy.