This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
k at rhizomatica.org k at rhizomatica.orghttp://www.telecomsource.net/showthread.php?293-What-is-the-diffrerence-between-FULL-and-SUB-values Ah.. internet... 😛 On February 12, 2019 11:17:40 AM UTC, Gullik Webjorn <gullik.webjorn at corevalue.se> wrote: >Hi, > >I cannot find a description of this command in the manual. This is very > >useful to debug >ms, antennas and radio. > >OsmoBSC> show conn >Active subscriber connections: >conn ID=232, MSC=0, hodec2_fail=0, mgw_ep=rtpbridge/1 at mgw >BTS 1, TRX 0, Timeslot 1, Lchan 0: Type TCH_F > Connection: 1, State: ESTABLISHED > BS Power: 0 dBm, MS Power: 10 dBm > Channel Mode / Codec: SPEECH_V1 > No Subscriber > Bound IP: 192.168.1.75 Port 16404 RTP_TYPE2=0 CONN_ID=0 > Conn. IP: 192.168.1.70 Port 4084 RTP_TYPE=3 SPEECH_MODE=0x00 > Measurement Report: > Flags: > MS Timing Offset: 0 > L1 MS Power: 10 dBm, Timing Advance: 4 > RXL-FULL-dl: -73 dBm, RXL-SUB-dl: -73 dBm RXQ-FULL-dl: 0, >RXQ-SUB-dl: 0 > RXL-FULL-ul: -57 dBm, RXL-SUB-ul: -58 dBm RXQ-FULL-ul: 0, >RXQ-SUB-ul: 0 > >I guess "dl" means downlink, from BTS to MS, and "ul" means uplink, MS >to BTS. > >But, what is the difference between FULL and SUB ? What does the two >rightmost items mean, >those which are 0 in the above? What does the "No Subscriber" mean, >should that be IMSI ? > >Still on the subject of LimeSDR Mini, now debugging radio and antenna >arrangements. > >Regards, >Gullik -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20190212/4dae21af/attachment.htm>