This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Gullik Webjorn gullik.webjorn at corevalue.seHi, I cannot find a description of this command in the manual. This is very useful to debug ms, antennas and radio. OsmoBSC> show conn Active subscriber connections: conn ID=232, MSC=0, hodec2_fail=0, mgw_ep=rtpbridge/1 at mgw BTS 1, TRX 0, Timeslot 1, Lchan 0: Type TCH_F Connection: 1, State: ESTABLISHED BS Power: 0 dBm, MS Power: 10 dBm Channel Mode / Codec: SPEECH_V1 No Subscriber Bound IP: 192.168.1.75 Port 16404 RTP_TYPE2=0 CONN_ID=0 Conn. IP: 192.168.1.70 Port 4084 RTP_TYPE=3 SPEECH_MODE=0x00 Measurement Report: Flags: MS Timing Offset: 0 L1 MS Power: 10 dBm, Timing Advance: 4 RXL-FULL-dl: -73 dBm, RXL-SUB-dl: -73 dBm RXQ-FULL-dl: 0, RXQ-SUB-dl: 0 RXL-FULL-ul: -57 dBm, RXL-SUB-ul: -58 dBm RXQ-FULL-ul: 0, RXQ-SUB-ul: 0 I guess "dl" means downlink, from BTS to MS, and "ul" means uplink, MS to BTS. But, what is the difference between FULL and SUB ? What does the two rightmost items mean, those which are 0 in the above? What does the "No Subscriber" mean, should that be IMSI ? Still on the subject of LimeSDR Mini, now debugging radio and antenna arrangements. Regards, Gullik