limesdr mini - osmo cni

historical

Hi ahmed,.
You cannot use default,  find and follow on some user link if you can.

You need to give us more details.

Thanks.

regards,
Sandi / DUO

On Tue, Dec 10, 2019, 03:40 ah med <grgrehreher at gmail.com> wrote:

> Hi
>
> Ok,let's start with the installation !
> setup : Limedsdr mini + ubuntu 18:04 + osmocm cni latest build
>
> 1- i used the Ubuntu latest build :
>
> -
> https://download.opensuse.org/repositories/network:/osmocom:/latest/xUbuntu_18.04/
>
> 2- i just installed all the required Programs using apt-get install
> command such as osmo-hlr ,osmo,msc etc...
>
> 3- i used this script to run the osmocom cni :
>
> #!/bin/sh
>> cmd="${1:-start}"
>> set -ex
>> systemctl $cmd osmo-hlr osmo-msc osmo-mgw osmo-ggsn osmo-sgsn osmo-stp
>> osmo-bsc osmo-hnbgw osmo-bts-trx osmo-trx-lms
>>
>
>
> 4- then by running ./osmo-all status i found that all programs work fine
> without any errors,only for osmo-trx-lms ,i just got this :
>
>
>> osmo-trx-lms[7995]: Sun Dec  8 18:02:03 2019 DLMS <0003> LMSDevice.cpp:94
>> [tid=140437169072832] Reference clock 40.00 MHz
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:03 2019 DDEV <0002>
>> LMSDevice.cpp:192 [tid=140437169072832] Init LMS device
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:04 2019 DDEV <0002>
>> LMSDevice.cpp:99 [tid=140437169072832] Sample Rate: Min=100000
>> Max=3.072e+07 Step=0
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:04 2019 DDEV <0002>
>> LMSDevice.cpp:228 [tid=140437169072832] Setting sample rate to 1.08333e+06 4
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:04 2019 DDEV <0002>
>> LMSDevice.cpp:234 [tid=140437169072832] Sample Rate: Host=1.08333e+06
>> RF=3.46667e+07
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:04 2019 DMAIN <0000>
>> LMSDevice.cpp:209 [tid=140437169072832] Antennas configured successfully
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:04 2019 DMAIN <0000>
>> Threads.cpp:117 [tid=140437098583808] Thread 140437098583808 (task 8127)
>> set name: CtrlService0
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:04 2019 DMAIN <0000>
>> osmo-trx.cpp:528 [tid=140437169072832] -- Transceiver active with 1
>> channel(s)
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:05 2019 DTRXCTRL <0001>
>> Transceiver.cpp:773 [tid=140437098583808][chan=0] command is 'POWEROFF'
>>  osmo-trx-lms[7995]: Sun Dec  8 18:02:05 2019 DTRXCTRL <0001>
>> Transceiver.cpp:918 [tid=140437098583808][chan=0] response is 'RSP POWEROFF
>> 0'
>>
>
>
>
> and for osmo-bts-trx :
>
>
> <0017> control_if.c:911 CTRL at 127.0.0.1 4238
>>  osmo-bts-trx[6675]: <0010> telnet_interface.c:104 Available via telnet
>> 127.0.0.1 4241
>>  osmo-bts-trx[6675]: <0012> input/ipaccess.c:897 enabling ipaccess BTS
>> mode, OML connecting to 192.168.122.1:3002
>>  osmo-bts-trx[6675]: <000b> trx_if.c:1155 phy0.0: Open transceiver
>>
>
>
> also,by using my phone,i can't find the created network  and so the
> problem is the limesdr mini (osmo-trx-lms) or the osmo-bts-trx .
>
> for the confihuration files,i used the default .cfg files for all programs
> .
>
> did i missed any thing ?
>
> PS : i just tried the osmocm cni with Raspberry and i got the same problem
> .
>
>
> Regards.
>
> Le lun. 9 déc. 2019 à 21:21, Pau Espin Pedrol <pespin at sysmocom.de> a
> écrit :
>
>> Hi,
>>
>> why do you say it doesn't work? what's not working? which osmocom
>> repositories are you using, nightly or latest?
>>
>> Please write detailed descriptions on what's failing rather than simply
>> writing "it doesn't work", otherwise nobody will be able nor interested
>> in helping you.
>>
>> --
>> - Pau Espin Pedrol <pespin at sysmocom.de>         http://www.sysmocom.de/
>> =======================================================================
>> * sysmocom - systems for mobile communications GmbH
>> * Alt-Moabit 93
>> * 10559 Berlin, Germany
>> * Sitz / Registered office: Berlin, HRB 134158 B
>> * Geschaeftsfuehrer / Managing Director: Harald Welte
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20191210/bfb3b8ab/attachment.htm>