This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Pau Espin Pedrol pespin at sysmocom.deSorry forgot to reply-all and didn't send original mail to ML, re-sending now. On 9/14/18 3:25 PM, Pau Espin Pedrol wrote: > Hi Rafael, > > You may want to check at PCU_IF_VERSION in both osmo-pcu.git and > osmo-pcu.git > > It seems that you are running a recent osmo-pcu together with a quite > old osmo-bts (from at least Feb 28 2018, see osmo-bts.git > 4046e3b3dd0cffd53d8d0d1f3e1bf9d0dec83ede), and they are not protocol > compatible. > > So you need to either use a newer osmo-bts (preferred I guess) or switch > to an older osmo-pcu which uses PCU_IF_VERSION 7. > > If you are using NuRan original firmware, you either ask them to update > their stuff or your are pretty much on your own to build new images > (with non-upstream osmocom versions afaik). > > At sysmocom we maintain meta-sysmocom-bsp [1] which together with > system-images [2] and osmocom's meta-telephny [3] allows to build > firmware for both sysmobts and litecell 1.5 machines, together with SDKs > to compile software for them. > > I think generated images are not available publicly, but I guess you can > either attempt building them yourself or perhaps ask sysmocom customer > support to have access to it. > > [1] https://git.sysmocom.de/poky/meta-sysmocom-bsp/ > [2] https://git.sysmocom.de/poky/system-images/ > [3] https://git.osmocom.org/meta-telephony/ > > Regards, > Pau > -- - Pau Espin Pedrol <pespin at sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte