This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Pierre Kim admin at manateeshome.comWith the newest git repo version of osmo-bsc, my nanoBTS fails to start. I can confirm that they work normally with ip.access softBSC. I thought osmocom Redmine issue #3063 might be relevant and tried setting/unsetting force-combined-si but I am still getting the same result. Attached are the packet capture and bsc config file The following is the log from osmo-bsc: <0015> input/ipa.c:262 accept()ed new link from 192.168.27.40 to port 3002 <0004> abis_nm.c:847 OC=BTS(01) INST=(ff,ff,ff): GET ATTRIBUTE NACK <0004> osmo_bsc_main.c:178 BTS0 does not support Get Attributes OML message. <0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0: ARI reported sw[0/5]: 168a004 is v136d0 <0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0: ARI reported sw[1/5]: 168a002 is v136d0 <0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0: ARI reported sw[2/5]: 168a002 is v136d0 <0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0: ARI reported sw[3/5]: 168a001 is v136d0 <0004> abis_nm.c:560 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): BTS0: ARI reported sw[4/5]: 168a001 is v136d0 <0004> abis_nm.c:494 BTS0 Attribute Manufacturer Dependent State is unreported <0004> abis_nm.c:2888 (bts=0,trx=0) IPA RSL CONNECT IP=0.0.0.0 PORT=3003 STREAM=0x00 <0015> input/ipa.c:262 accept()ed new link from 192.168.27.40 to port 3003 <0003> osmo_bsc_main.c:283 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 600 using MCC-MNC 450-09 LAC=23 CID=0 BSIC=63 BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=l2_bch.c:1149 **** ** l2_bch.c#1149:BCHbcchSItypeValid( prim_p->infoType ) ** IPA_SW_FATAL_ERROR ** In task "TRX Proc:L2_BCH" @ (325). **** . BTS 0: Failure Event Report: Type=processing failure, Severity=critical failure, Probable cause=Manufacturer specific values: Fatal software error, Additional Text=TRX Proc:L2_BCH:l2_bch.c#1149 (325). BTS 0: Failure Event Report: Type=processing failure, Severity=warning level failure, Probable cause=Manufacturer specific values: Software warning, Additional Text=31782:WARN:OAM_RES:trx_fatal_error_log.c#255:TRX has logged the error: . BTS 0: Failure Event Report: Type=processing failure, Severity=warning level failure, Probable cause=Manufacturer specific values: Software warning, Additional Text=31782:WARN:OAM_RES:trx_fatal_error_log.c#256:TRX Proc:L2_BCH:l2_bch.c#1149 (325) -------------- next part -------------- ! ! OsmoBSC (1.3.0.139-75f03) configuration saved from vty !! ! log stderr logging filter all 1 logging color 1 logging print category 0 logging timestamp 0 logging print file 1 logging level rll notice logging level mm notice logging level rr notice logging level rsl notice logging level nm info logging level pag notice logging level meas notice logging level msc notice logging level ho notice logging level hodec notice logging level ref notice logging level nat notice logging level ctrl notice logging level filter debug logging level pcu debug logging level lcls notice logging level chan notice logging level ts notice logging level as notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice ! stats interval 5 ! line vty no login ! e1_input e1_line 0 driver ipa e1_line 0 port 0 no e1_line 0 keepalive cs7 instance 0 point-code 0.23.3 network network country code 450 mobile network code 09 encryption a5 1 3 neci 0 paging any use tch 0 bts 0 type nanobts band PCS1900 cell_identity 0 location_area_code 23 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 radio-link-timeout 32 channel allocator ascending rach tx integer 9 rach max transmission 7 channel-descrption attach 1 channel-descrption bs-pa-mfrms 5 channel-descrption bs-ag-blks-res 1 no access-control-class-ramping access-control-class-ramping-step-interval dynamic access-control-class-ramping-step-size 1 early-classmark-sending forbidden early-classmark-sending-3g allowed ip.access unit_id 1801 0 oml ip.access stream_id 255 line 0 neighbor-list mode manual codec-support fr hr efr amr amr tch-f modes 1 2 6 7 amr tch-f threshold ms 32 32 32 amr tch-f hysteresis ms 8 8 8 amr tch-f threshold bts 32 32 32 amr tch-f hysteresis bts 8 8 8 amr tch-f start-mode auto amr tch-h modes 1 2 4 5 amr tch-h threshold ms 32 32 32 amr tch-h hysteresis ms 8 8 8 amr tch-h threshold bts 32 32 32 amr tch-h hysteresis bts 8 8 8 amr tch-h start-mode auto gprs mode none force-combined-si trx 0 rf_locked 0 arfcn 600 nominal power 23 max_power_red 0 rsl e1 tei 0 timeslot 0 phys_chan_config CCCH hopping enabled 0 timeslot 1 phys_chan_config SDCCH8 hopping enabled 0 timeslot 2 phys_chan_config TCH/F hopping enabled 0 timeslot 3 phys_chan_config TCH/F hopping enabled 0 timeslot 4 phys_chan_config TCH/F hopping enabled 0 timeslot 5 phys_chan_config TCH/F hopping enabled 0 timeslot 6 phys_chan_config TCH/F hopping enabled 0 timeslot 7 phys_chan_config TCH/F hopping enabled 0 msc 0 ip.access rtp-base 4000 no bsc-welcome-text no bsc-msc-lost-text no bsc-grace-text codec-list hr3 type normal allow-emergency deny amr-config 12_2k forbidden amr-config 10_2k forbidden amr-config 7_95k forbidden amr-config 7_40k forbidden amr-config 6_70k forbidden amr-config 5_90k allowed amr-config 5_15k forbidden amr-config 4_75k forbidden asp-protocol m3ua lcls-mode disabled lcls-codec-mismatch forbidden bsc mid-call-timeout 0 no missing-msc-text -------------- next part -------------- A non-text attachment was scrubbed... Name: nanobts.pcap Type: application/octet-stream Size: 30322 bytes Desc: not available URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20181126/bc2fca41/attachment.obj>