This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Pau Espin Pedrol pespin at sysmocom.deHi Antony, I didn't test myself this kind of setup and I bet nobody confirmed it is working for osmo-trx-lms yet. In any case, I think you need to tell osmo-trx to enable 2 channels, by adding a "chan 1" node to your config, same as with you have with "chan 0", but with RX/TX paths set accordingly. -- - Pau Espin Pedrol <pespin at sysmocom.de> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Geschaeftsfuehrer / Managing Director: Harald Welte