osmo-bts-trx fails frequently on osmo-gsm-tester

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Pau Espin Pedrol pespin at sysmocom.de
Mon Jul 10 15:59:05 UTC 2017



On 10/07/17 11:59, Neels Hofmeyr wrote:
> On Sun, Jul 09, 2017 at 06:35:51PM +0200, Pau Espin Pedrol wrote:
>> On top of that, I think the issues come too from the fact that we are
>> starting the whole network in an automatic way at the same time, which
>> increases the number of messages and time required to sync everything and
>> become stable.
> 
> I did try once to add several seconds of delay between launching osmo-trx and
> osmo-bts-trx, without effect, so I doubt that it's system load.  (osmo-bts-trx
> is typically the last program to be launched.)
> 

Indeed, that was not the root cause for the issue I already fixed in 
osmo-trx, which was the most common issue, but I'm still not sure about 
the other one we are still facing, I need to look into it.

-- 
- Pau Espin Pedrol <pespin at sysmocom.de>         http://www.sysmocom.de/
=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte



More information about the OpenBSC mailing list