This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Snehasish Kar snehasish.cse at LIVE.COMProblem is usrp x310 doesnot support the gsmband, it works above 1.2GHz. Also if I still change the MCC and MNC I am not not able to find the network on the phone, and any clue on this error "check_rx_md_err: An internal receive buffer has filled", it comes in osmo-trx. ________________________________ From: Dhananjay kumar <dhananjay.cse at gmail.com> Sent: Monday, January 23, 2017 11:37:38 AM To: Snehasish Kar Cc: nhofmeyr at sysmocom.de Subject: Re: Omsobts -osmotrx communication problem hi, network country code 404 mobile network code 31 Change it to network country code 001 mobile network code 01 short name TESTPLMN long name TESTPLMN Try it in Band 850 . 900 and 1800 and widely used in India by commercial operates. Remove all neighbor cell list. You are using 404 31 , it might match some real network, and you will not able to see your test network. BR Dhananjay On Mon, Jan 23, 2017 at 11:20 AM, Snehasish Kar <snehasish.cse at live.com<mailto:snehasish.cse at live.com>> wrote: Hi I have attached my config as requested, also in osmo-trx I am getting the following error "check_rx_md_err: An internal receive buffer has filled" and I am not able to view the network in my phone. I am using usrp x310 and os UBUNTU. BR Snehasish ________________________________ From: Neels Hofmeyr <nhofmeyr at sysmocom.de<mailto:nhofmeyr at sysmocom.de>> Sent: Saturday, January 21, 2017 4:35:06 AM To: Snehasish Kar Cc: openbsc at lists.osmocom.org<mailto:openbsc at lists.osmocom.org> Subject: Re: Omsobts -osmotrx communication problem On Fri, Jan 20, 2017 at 11:58:53AM +0000, Snehasish Kar wrote: > Hi > > I have installed osmobts and osmotrx with openbsc, to enable openbsc with usrp. But whenever I tried running the three applications, I gave the following error in osmobts. Please help me with it. > > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid > > <000b> trx_if.c:490 Tx burst length 0 invalid If I remember correctly, osmo-bts-trx will at startup show a bunch of these and then continue normally. To clarify, you need to run 'osmo-trx', 'osmo-bts-trx' and 'osmo-nitb'. We can't help further with this little information on your config. ~N -- - Neels Hofmeyr <nhofmeyr at sysmocom.de<mailto:nhofmeyr at sysmocom.de>> http://www.sysmocom.de/ ======================================================================= * sysmocom - systems for mobile communications GmbH * Alt-Moabit 93 * 10559 Berlin, Germany * Sitz / Registered office: Berlin, HRB 134158 B * Gesch?ftsf?hrer / Managing Directors: Harald Welte -- Thanks & Regards Dhananjay 9686184214 Luck is what happens when preparation meets opportunity. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20170123/03de8835/attachment.htm>