chan_alloc.c help

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

sami sami.0jacob0 at gmail.com
Sat Sep 3 08:15:36 UTC 2016


Hi,

What version of UHD are you using ? I would suggest using version 3.7 or 3.8.


Best regards,
Robert,

On Sep 2, 2016, at 5:18 PM, Abdulghafar Shabaneh <abdulghafar1412 at gmail.com> wrote:

> Hi Neels and everyone in the list,
> 
> Thanks for your help in installing OpenBSc on my Raspberry Pi :)
>  It was as you said that I should delete it and build from scratch. 
> The prefix command fixed the issue as well 
> ./configure --prefix=/usr .. 
> 
> I was unable to install lcr due to an error:
> Makefile:1306: recipe for target 'chan_lcr.po' failed
> I don't know if that will fix the problem, though, its optional, and osmo-nitb should do the job by it self.
> 
> Now I ran the osmo-nitb, osmo-bts-trx and osmo-trx all together with the USRP2 with FLEX900 daughter board GSM900 band, it all works well except the mobile is not able to register on the network. osmo-nitb shows this error: (towards the end)
> 
> my file >trybsc.cfg contains this:
> ! password foo
> !
> line vty
>  no login
> !
> e1_input
>  e1_line 0 driver ipa
> network
>  network country code 416
>  mobile network code 77
>  short name GSMab
>  long name GSMab
>  auth policy accept-all
>  location updating reject cause 13
>  encryption a5 0
>  neci 1
>  paging any use tch 0
>  rrlp mode none
>  mm info 1
>  handover 0
>  handover window rxlev averaging 10
>  handover window rxqual averaging 1
>  handover window rxlev neighbor averaging 10
>  handover power budget interval 6
>  handover power budget hysteresis 3
>  handover maximum distance 9999
>  timer t3101 10
>  timer t3103 0
>  timer t3105 0
>  timer t3107 0
>  timer t3109 0
>  timer t3111 0
>  timer t3113 60
>  timer t3115 0
>  timer t3117 0
>  timer t3119 0
>  timer t3122 10
>  timer t3141 0
>  dtx-used 0
>  subscriber-keep-in-ram 0
>  bts 0
>   type sysmobts
>   band GSM900
>   cell_identity 0
>   location_area_code 1
>   training_sequence_code 7
>   base_station_id_code 63
>   ms max power 0
>   cell reselection hysteresis 4
>   rxlev access min 0
>   periodic location update 30
>   channel allocator descending
>   rach tx integer 9
>   rach max transmission 7
>  ! channel-descrption attach 1
>  ! channel-descrption bs-pa-mfrms 5
>  ! channel-descrption bs-ag-blks-res 1
>   ip.access unit_id 1801 0
>   oml ip.access stream_id 255 line 0
>   neighbor-list mode automatic
>   trx 0
>    rf_locked 0
>    arfcn 100
>    nominal power 0
>    max_power_red 0
>    rsl e1 tei 0
>     timeslot 0
>      phys_chan_config CCCH+SDCCH4
>      hopping enabled 0
>     timeslot 1
>      phys_chan_config TCH/F
>      hopping enabled 0
>     timeslot 2
>      phys_chan_config TCH/F
>      hopping enabled 0
>     timeslot 3
>      phys_chan_config TCH/F
>      hopping enabled 0
>     timeslot 4
>      phys_chan_config TCH/F
>      hopping enabled 0
>     timeslot 5
>      phys_chan_config TCH/F
>      hopping enabled 0
>     timeslot 6
>      phys_chan_config TCH/F
>      hopping enabled 0
>     timeslot 7
>      phys_chan_config TCH/F
>      hopping enabled 0
> 
> pi at dwarfabd:~ $ sudo osmo-nitb -c ~/trybsc.cfg -l hlr.sqlite3 -P -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM
> <0005> bsc_init.c:498 VTY at 127.0.0.1 4242
> <0005> bsc_init.c:427
> WARNING: You are running an 'accept-all' network on a BTS that is not barred.  This configuration is likely to interfere with production GSM networks and should only be used in a RF shielded environment such as a faraday cage!
> 
> <0005> bsc_hack.c:318 CTRL at 127.0.0.1 4249
> DB: Database initialized.
> DB: Database prepared.
> <0005> abis_nm.c:316 OC=SITE-MANAGER(00) INST=(ff,ff,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:1768 OC=SITE-MANAGER(00) INST=(ff,ff,ff) Sending OPSTART
> <0005> abis_nm.c:316 OC=BTS(01) INST=(00,ff,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05)
> <0005> abis_nm.c:1449 Set BTS Attr (bts=0)
> <0005> abis_nm.c:1768 OC=BTS(01) INST=(00,ff,ff) Sending OPSTART
> <0005> abis_nm.c:316 OC=GPRS-NSE(f0) INST=(00,ff,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05)
> <0005> abis_nm.c:316 OC=GPRS-CELL(f1) INST=(00,ff,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05)
> <0005> abis_nm.c:316 OC=GPRS-NSVC(f2) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=Dependency(05)
> <0005> abis_nm.c:316 OC=GPRS-NSVC(f2) INST=(00,01,ff) STATE CHG: OP_STATE=Disabled AVAIL=Off line(03)
> <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=NULL AVAIL=Power off(02)
> <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=Disabled AVAIL=OK(ff)
> <0005> abis_nm.c:1768 OC=RADIO-CARRIER(02) INST=(00,00,ff) Sending OPSTART
> <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=NULL AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) Software Activated Report
> <0005> abis_nm.c:1466 Set TRX Attr (bts=0,trx=0)
> <0005> abis_nm.c:1768 OC=RADIO-CARRIER(02) INST=(00,00,ff) Sending OPSTART
> <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) Software Activated Report
> <0005> abis_nm.c:1768 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) Sending OPSTART
> <0005> abis_nm.c:2587 ip.access RSL CONNECT IP=0.0.0.0 PORT=3003 STREAM=0x00
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=0)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,00) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=1)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,01) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=2)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,02) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=3)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,03) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=4)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,04) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=5)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,05) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=6)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,06) Sending OPSTART
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=Disabled AVAIL=Dependency(05)
> <0005> abis_nm.c:1661 Set Chan Attr (bts=0,trx=0,ts=7)
> <0005> abis_nm.c:1768 OC=CHANNEL(03) INST=(00,00,07) Sending OPSTART
> <0005> abis_nm.c:316 OC=BTS(01) INST=(00,ff,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=RADIO-CARRIER(02) INST=(00,00,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:2429 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff) IPACCESS(0xe1): RSL CONNECT ACK
> <0004> bsc_init.c:287 bootstrapping RSL for BTS/TRX (0/0) on ARFCN 100 using MCC=416 MNC=77 LAC=1 CID=0 BSIC=63
> <0003> system_information.c:525 Serving cell: 100
> <0003> bsc_init.c:104 SI1: 55 06 19 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 e5 04 00 2b
> <0003> bsc_init.c:104 SI2: 59 06 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff e5 04 00
> <0003> bsc_init.c:104 SI3: 49 06 1b 00 00 14 f6 77 00 01 49 03 05 27 53 40 e5 04 00 39 2b 2b 2b
> <0003> bsc_init.c:104 SI4: 31 06 1c 14 f6 77 00 01 53 40 e5 04 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
> <0003> bsc_init.c:104 SI5: 49 06 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b 2b 2b 2b
> <0003> bsc_init.c:104 SI6: 2d 06 1e 00 00 14 f6 77 00 01 27 ff 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,00) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,01) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,02) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,03) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,04) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,05) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,06) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0005> abis_nm.c:316 OC=CHANNEL(03) INST=(00,00,07) STATE CHG: OP_STATE=Enabled AVAIL=OK(ff)
> <0000> chan_alloc.c:367 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Allocating lchan=0 as SDCCH
> <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=0,ss=0) Activating ARFCN(100) SS(0) lctype SDCCH r=LOCATION_UPDATE ra=0x0b ta=3
> <0004> abis_rsl.c:539 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Tx RSL Channel Activate with act_type=INITIAL
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state NONE -> ACTIVATION REQUESTED
> <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=0,ss=0) CHANNEL ACTIVATE ACK
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state ACTIVATION REQUESTED -> ACTIVE
> <0000> chan_alloc.c:367 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Allocating lchan=1 as SDCCH
> <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=0,ss=1) Activating ARFCN(100) SS(1) lctype SDCCH r=OTHER ra=0x1f ta=2
> <0004> abis_rsl.c:539 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Tx RSL Channel Activate with act_type=INITIAL
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state NONE -> ACTIVATION REQUESTED
> <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=0,ss=1) CHANNEL ACTIVATE ACK
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state ACTIVATION REQUESTED -> ACTIVE
> <0004> abis_rsl.c:772 (bts=0,trx=0,ts=0,ss=0) RF Channel Release CMD due error 1
> <0004> abis_rsl.c:721 (bts=0,trx=0,ts=0,ss=0) DEACTivate SACCH CMD
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state ACTIVE -> RELEASE DUE ERROR
> <0004> abis_rsl.c:830 (bts=0,trx=0,ts=0,ss=0) RF CHANNEL RELEASE ACK
> <0004> abis_rsl.c:736 (bts=0,trx=0,ts=0,ss=0) is back in operation.
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=0) state RELEASE DUE ERROR -> NONE
> <0004> abis_rsl.c:772 (bts=0,trx=0,ts=0,ss=1) RF Channel Release CMD due error 1
> <0004> abis_rsl.c:721 (bts=0,trx=0,ts=0,ss=1) DEACTivate SACCH CMD
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state ACTIVE -> RELEASE DUE ERROR
> <0004> abis_rsl.c:830 (bts=0,trx=0,ts=0,ss=1) RF CHANNEL RELEASE ACK
> <0004> abis_rsl.c:736 (bts=0,trx=0,ts=0,ss=1) is back in operation.
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=0,ss=1) state RELEASE DUE ERROR -> NONE
> <0000> chan_alloc.c:367 (bts=0,trx=0,ts=7,pchan=TCH/F) Allocating lchan=0 as TCH_F
> <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=7,ss=0) Activating ARFCN(100) SS(0) lctype TCH_F r=PAGING ra=0x37 ta=0
> <0004> abis_rsl.c:539 (bts=0,trx=0,ts=7,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVATION REQUESTED
> <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=7,ss=0) CHANNEL ACTIVATE ACK
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVATION REQUESTED -> ACTIVE
> <0004> abis_rsl.c:772 (bts=0,trx=0,ts=7,ss=0) RF Channel Release CMD due error 1
> <0004> abis_rsl.c:721 (bts=0,trx=0,ts=7,ss=0) DEACTivate SACCH CMD
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVE -> RELEASE DUE ERROR
> <0004> abis_rsl.c:830 (bts=0,trx=0,ts=7,ss=0) RF CHANNEL RELEASE ACK
> <0004> abis_rsl.c:736 (bts=0,trx=0,ts=7,ss=0) is back in operation.
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state RELEASE DUE ERROR -> NONE
> <0000> chan_alloc.c:367 (bts=0,trx=0,ts=7,pchan=TCH/F) Allocating lchan=0 as TCH_F
> <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=7,ss=0) Activating ARFCN(100) SS(0) lctype TCH_F r=CALL ra=0xc4 ta=5
> <0004> abis_rsl.c:539 (bts=0,trx=0,ts=7,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVATION REQUESTED
> <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=7,ss=0) CHANNEL ACTIVATE ACK
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVATION REQUESTED -> ACTIVE
> <0004> abis_rsl.c:772 (bts=0,trx=0,ts=7,ss=0) RF Channel Release CMD due error 1
> <0004> abis_rsl.c:721 (bts=0,trx=0,ts=7,ss=0) DEACTivate SACCH CMD
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVE -> RELEASE DUE ERROR
> <0004> abis_rsl.c:830 (bts=0,trx=0,ts=7,ss=0) RF CHANNEL RELEASE ACK
> <0004> abis_rsl.c:736 (bts=0,trx=0,ts=7,ss=0) is back in operation.
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state RELEASE DUE ERROR -> NONE
> <0000> chan_alloc.c:367 (bts=0,trx=0,ts=7,pchan=TCH/F) Allocating lchan=0 as TCH_F
> <0004> abis_rsl.c:1705 (bts=0,trx=0,ts=7,ss=0) Activating ARFCN(100) SS(0) lctype TCH_F r=OTHER ra=0x51 ta=1
> <0004> abis_rsl.c:539 (bts=0,trx=0,ts=7,pchan=TCH/F) Tx RSL Channel Activate with act_type=INITIAL
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state NONE -> ACTIVATION REQUESTED
> <0004> abis_rsl.c:1434 (bts=0,trx=0,ts=7,ss=0) CHANNEL ACTIVATE ACK
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVATION REQUESTED -> ACTIVE
> <0004> abis_rsl.c:772 (bts=0,trx=0,ts=7,ss=0) RF Channel Release CMD due error 1
> <0004> abis_rsl.c:721 (bts=0,trx=0,ts=7,ss=0) DEACTivate SACCH CMD
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state ACTIVE -> RELEASE DUE ERROR
> <0004> abis_rsl.c:830 (bts=0,trx=0,ts=7,ss=0) RF CHANNEL RELEASE ACK
> <0004> abis_rsl.c:736 (bts=0,trx=0,ts=7,ss=0) is back in operation.
> <0004> abis_rsl.c:1105 (bts=0,trx=0,ts=7,ss=0) state RELEASE DUE ERROR -> NONE
> 
> ************************************************************************************************************************************************
> ************************************************************************************************************************************************
> Part of osmo-bts-trx output:
> 
> :375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611408 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611412 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611412 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1611449 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1611449 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611453 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611453 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611459 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611459 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1611463 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1611463 ts=0 trx=0
> 
> 9 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613809 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1613846 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1613846 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613850 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613850 ts=0 trx=0
> 
> 
> 7 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616247 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616253 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616253 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616257 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616257 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1616294 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1616294 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616298 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616298 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616304 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616304 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1616308 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1616308 ts=0 trx=0
> <0006> scheduler_trx.c:1517 GSM clock jitter: -2556
> 
> 
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613856 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613856 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613860 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613860 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=BCCH chan_nr=0x80 link_id=0x00 fn=1613897 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x80 link_id=0x00 fn=1613897 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613901 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613901 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613907 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613907 ts=0 trx=0
> <0006> scheduler.c:439 PH-RTS.ind: chan=CCCH chan_nr=0x90 link_id=0x00 fn=1613911 ts=0 trx=0
> <0006> scheduler.c:375 PH-DATA.req: chan_nr=0x90 link_id=0x00 fn=1613911 ts=0 trx=0
> 
> 
> 
> Thanks
> Abdulghafar

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20160903/3728a8c3/attachment.htm>


More information about the OpenBSC mailing list