[MERGED] osmo-pcu[master]: Change internal API for consistency

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Holger Freyther gerrit-no-reply at lists.osmocom.org
Thu May 19 06:40:26 UTC 2016


Holger Freyther has submitted this change and it was merged.

Change subject: Change internal API for consistency
......................................................................


Change internal API for consistency

Make TRX API (void *) consistent with the way it's used (integer). Use
uint8_t for TRX numbering everywhere (we don't expect hardware with
more than 256 transceivers in the near future). This change helps to
avoid unnecessary casts and make API much clearer.

Change-Id: Ic584611184b0c8b5417ecff0ddae3d526b55a079
Related: SYS#2443
Reviewed-on: https://gerrit.osmocom.org/59
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger at freyther.de>
---
M src/osmo-bts-sysmo/sysmo_l1_if.c
M src/osmo-bts-sysmo/sysmo_l1_if.h
M src/pcu_l1_if.cpp
3 files changed, 10 insertions(+), 9 deletions(-)

Approvals:
  Jenkins Builder: Verified
  Holger Freyther: Looks good to me, approved



diff --git a/src/osmo-bts-sysmo/sysmo_l1_if.c b/src/osmo-bts-sysmo/sysmo_l1_if.c
index c7c54dd..c072c1a 100644
--- a/src/osmo-bts-sysmo/sysmo_l1_if.c
+++ b/src/osmo-bts-sysmo/sysmo_l1_if.c
@@ -155,7 +155,7 @@
 	switch (rts_ind->sapi) {
 	case GsmL1_Sapi_Pdtch:
 	case GsmL1_Sapi_Pacch:
-		rc = pcu_rx_rts_req_pdtch((long)fl1h->priv, rts_ind->u8Tn,
+		rc = pcu_rx_rts_req_pdtch(fl1h->trx_no, rts_ind->u8Tn,
 			rts_ind->u16Arfcn, rts_ind->u32Fn, rts_ind->u8BlockNbr);
 	case GsmL1_Sapi_Ptcch:
 		// FIXME
@@ -215,7 +215,7 @@
 			!= GsmL1_PdtchPlType_Full)
 			break;
 		/* PDTCH / PACCH frame handling */
-		pcu_rx_data_ind_pdtch((long)fl1h->priv, data_ind->u8Tn,
+		pcu_rx_data_ind_pdtch(fl1h->trx_no, data_ind->u8Tn,
 			data_ind->msgUnitParam.u8Buffer + 1,
 			data_ind->msgUnitParam.u8Size - 1,
 			data_ind->u32Fn,
@@ -357,7 +357,7 @@
 	return 0;
 }
 
-void *l1if_open_pdch(void *priv, uint32_t hlayer1, struct gsmtap_inst *gsmtap)
+void *l1if_open_pdch(uint8_t trx_no, uint32_t hlayer1, struct gsmtap_inst *gsmtap)
 {
 	struct femtol1_hdl *fl1h;
 	int rc;
@@ -367,7 +367,7 @@
 		return NULL;
 
 	fl1h->hLayer1 = hlayer1;
-	fl1h->priv = priv;
+	fl1h->trx_no = trx_no;
 	fl1h->clk_cal = 0;
 	/* default clock source: OCXO */
 	fl1h->clk_src = SuperFemto_ClkSrcId_Ocxo;
diff --git a/src/osmo-bts-sysmo/sysmo_l1_if.h b/src/osmo-bts-sysmo/sysmo_l1_if.h
index 6b50d4e..8f1857e 100644
--- a/src/osmo-bts-sysmo/sysmo_l1_if.h
+++ b/src/osmo-bts-sysmo/sysmo_l1_if.h
@@ -38,7 +38,7 @@
 	struct gsmtap_inst *gsmtap;
 	uint32_t gsmtap_sapi_mask;
 
-	void *priv;			/* user reference */
+	uint8_t trx_no;
 
 	struct osmo_timer_list alive_timer;
 	unsigned int alive_prim_cnt;
diff --git a/src/pcu_l1_if.cpp b/src/pcu_l1_if.cpp
index 67272ab..790789c 100644
--- a/src/pcu_l1_if.cpp
+++ b/src/pcu_l1_if.cpp
@@ -44,7 +44,8 @@
 
 // FIXME: move this, when changed from c++ to c.
 extern "C" {
-void *l1if_open_pdch(void *priv, uint32_t hlayer1, struct gsmtap_inst *gsmtap);
+void *l1if_open_pdch(uint8_t trx_no, uint32_t hlayer1,
+		     struct gsmtap_inst *gsmtap);
 int l1if_connect_pdch(void *obj, uint8_t ts);
 int l1if_pdch_req(void *obj, uint8_t ts, int is_ptcch, uint32_t fn,
         uint16_t arfcn, uint8_t block_nr, uint8_t *data, uint8_t len);
@@ -330,8 +331,8 @@
 	struct gprs_bssgp_pcu *pcu;
 	struct gprs_rlcmac_pdch *pdch;
 	struct in_addr ia;
-	int rc = 0;
-	int trx, ts;
+	int rc = 0, ts;
+	uint8_t trx;
 	int i;
 
 	if (info_ind->version != PCU_IF_VERSION) {
@@ -450,7 +451,7 @@
 				info_ind->trx[trx].hlayer1);
 				if (!bts->trx[trx].fl1h)
 					bts->trx[trx].fl1h = l1if_open_pdch(
-						(void *)trx,
+						trx,
 						info_ind->trx[trx].hlayer1,
 						bts->gsmtap);
 			if (!bts->trx[trx].fl1h) {

-- 
To view, visit https://gerrit.osmocom.org/59
To unsubscribe, visit https://gerrit.osmocom.org/settings

Gerrit-MessageType: merged
Gerrit-Change-Id: Ic584611184b0c8b5417ecff0ddae3d526b55a079
Gerrit-PatchSet: 3
Gerrit-Project: osmo-pcu
Gerrit-Branch: master
Gerrit-Owner: Max <msuraev at sysmocom.de>
Gerrit-Reviewer: Holger Freyther <holger at freyther.de>
Gerrit-Reviewer: Jenkins Builder



More information about the OpenBSC mailing list