MGCP logging

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.

Kristian Martens kristian.martens at ng4t.com
Tue Dec 6 07:53:46 UTC 2016


Hi Harald,

thank you for your answer. Please find attached the config. files.

Regards, Kristian



Am 05.12.2016 um 21:30 schrieb Harald Welte:
> Hi Kristian,
>
> On Mon, Dec 05, 2016 at 07:01:36PM +0100, Kristian Martens wrote:
>> I have switched on logging to file and have set the log level to "debug"
>> for "mgcp" in both osmo-bsc.cfg and osmo-bsc-mgcp.cfg. Still I cannot
>> find any output in the log file related to MGCP if I get an error. Is
>> there a trick to make the MGCP module more verbose?
> it would be helpful if you could attach your config file, so we can
> check it.
>

-------------- next part --------------
!
! OsmoBSC (0.14.0+gitrAUTOINC+57ee780789-dirty) configuration saved from vty
!!
password foo
!
log file /home/root/bsc1.log
  logging filter all 1
  logging color 1
  logging print category 0
  logging timestamp 1
  logging level all everything
  logging level rll notice
  logging level cc notice
  logging level mm notice
  logging level rr notice
  logging level rsl notice
  logging level nm info
  logging level mncc notice
  logging level pag notice
  logging level meas notice
  logging level sccp notice
  logging level msc debug
  logging level mgcp debug
  logging level ho notice
  logging level db notice
  logging level ref notice
  logging level gprs debug
  logging level ns debug
  logging level bssgp debug
  logging level llc debug
  logging level sndcp debug
  logging level nat notice
  logging level ctrl notice
  logging level smpp debug
  logging level filter debug
  logging level lglobal notice
  logging level llapd notice
  logging level linp notice
  logging level lmux notice
  logging level lmi notice
  logging level lmib notice
  logging level lsms notice
  logging level lctrl notice
  logging level lgtp notice
!
line vty
 no login
!
e1_input
 e1_line 0 driver ipa
 e1_line 0 port 0
 no e1_line 0 keepalive
network
 network country code 262
 mobile network code 79
 short name ng4T-BSC-0
 long name ng4T-BSC-0
 auth policy closed
 location updating reject cause 13
 encryption a5 0
 neci 1
 paging any use tch 0
 rrlp mode none
 mm info 1
 handover 0
 handover window rxlev averaging 10
 handover window rxqual averaging 1
 handover window rxlev neighbor averaging 10
 handover power budget interval 6
 handover power budget hysteresis 3
 handover maximum distance 9999
 timer t3101 10
 timer t3103 0
 timer t3105 0
 timer t3107 0
 timer t3109 0
 timer t3111 0
 timer t3113 60
 timer t3115 0
 timer t3117 0
 timer t3119 0
 timer t3122 0
 timer t3141 0
 dtx-used 0
 subscriber-keep-in-ram 0
 bts 0
  type nanobts
  band DCS1800
  cell_identity 0
  location_area_code 1
  base_station_id_code 63
  ms max power 15
  cell reselection hysteresis 4
  rxlev access min 0
  periodic location update 30
  channel allocator ascending
  rach tx integer 9
  rach max transmission 7
  channel-descrption attach 1
  channel-descrption bs-pa-mfrms 5
  channel-descrption bs-ag-blks-res 1
  ip.access unit_id 1234 0
  oml ip.access stream_id 255 line 0
  neighbor-list mode manual-si5
  neighbor-list add arfcn 100
  neighbor-list add arfcn 200
  si5 neighbor-list add arfcn 10
  si5 neighbor-list add arfcn 20
  codec-support fr
  gprs mode gprs
  gprs routing area 0
  gprs network-control-order nc0
  gprs cell bvci 20
  gprs cell timer blocking-timer 3
  gprs cell timer blocking-retries 3
  gprs cell timer unblocking-retries 3
  gprs cell timer reset-timer 3
  gprs cell timer reset-retries 3
  gprs cell timer suspend-timer 10
  gprs cell timer suspend-retries 3
  gprs cell timer resume-timer 10
  gprs cell timer resume-retries 3
  gprs cell timer capability-update-timer 10
  gprs cell timer capability-update-retries 3
  gprs nsei 149
  gprs ns timer tns-block 3
  gprs ns timer tns-block-retries 3
  gprs ns timer tns-reset 3
  gprs ns timer tns-reset-retries 3
  gprs ns timer tns-test 30
  gprs ns timer tns-alive 3
  gprs ns timer tns-alive-retries 10
  gprs nsvc 0 nsvci 20
  gprs nsvc 0 local udp port 23000
  gprs nsvc 0 remote udp port 23000
  gprs nsvc 0 remote ip 192.168.17.101
  gprs nsvc 1 nsvci 0
  gprs nsvc 1 local udp port 0
  gprs nsvc 1 remote udp port 0
  gprs nsvc 1 remote ip 0.0.0.0
  no force-combined-si
  trx 0
   rf_locked 0
   arfcn 871
   nominal power 23
   max_power_red 20
   rsl e1 tei 0
    timeslot 0
     phys_chan_config CCCH+SDCCH4
     hopping enabled 0
    timeslot 1
     phys_chan_config TCH/F
     hopping enabled 0
    timeslot 2
     phys_chan_config TCH/F
     hopping enabled 0
    timeslot 3
     phys_chan_config TCH/F
     hopping enabled 0
    timeslot 4
     phys_chan_config TCH/F
     hopping enabled 0
    timeslot 5
     phys_chan_config TCH/F
     hopping enabled 0
    timeslot 6
     phys_chan_config TCH/F
     hopping enabled 0
    timeslot 7
     phys_chan_config TCH/F
     hopping enabled 0
msc 0
 ip.access rtp-base 4000
 timeout-ping 20
 timeout-pong 5
 no timeout-ping advanced
 no bsc-welcome-text
 no bsc-msc-lost-text
 no bsc-grace-text
 codec-list fr1 fr2
 dest 192.168.17.100 6666 0
 type normal
 allow-emergency allow
 amr-config 12_2k allowed
 amr-config 10_2k allowed
 amr-config 7_95k allowed
 amr-config 7_40k allowed
 amr-config 6_70k allowed
 amr-config 5_90k allowed
 amr-config 5_15k allowed
 amr-config 4_75k forbidden
bsc
 mid-call-timeout 0
 no missing-msc-text
-------------- next part --------------
!
! OpenBSC MGCP (0.14.0+gitrAUTOINC+57ee780789-dirty) configuration saved from vty
!!
password foo
!
log stderr
  logging filter all 1
  logging color 1
  logging print category 0
  logging timestamp 0
  logging level all everything
  logging level rll notice
  logging level cc notice
  logging level mm notice
  logging level rr notice
  logging level rsl notice
  logging level nm info
  logging level mncc notice
  logging level pag notice
  logging level meas notice
  logging level sccp notice
  logging level msc notice
  logging level mgcp debug
  logging level ho notice
  logging level db notice
  logging level ref notice
  logging level gprs debug
  logging level ns info
  logging level bssgp debug
  logging level llc debug
  logging level sndcp debug
  logging level nat notice
  logging level ctrl notice
  logging level smpp debug
  logging level filter debug
  logging level lglobal notice
  logging level llapd notice
  logging level linp notice
  logging level lmux notice
  logging level lmi notice
  logging level lmib notice
  logging level lsms notice
  logging level lctrl notice
  logging level lgtp notice
!
line vty
 no login
!
mgcp
  bts ip 172.16.252.43
  bind ip 192.168.17.105
  bind port 2427
  rtp bts-base 4000
  rtp net-base 16000
  rtp ip-dscp 0
  rtp keep-alive once
  no rtcp-omit
  no rtp-patch
  sdp audio-payload number 98
  sdp audio-payload name AMR/8000
  sdp audio-payload send-ptime
  sdp audio-payload send-name
  loop 1
  number endpoints 31
  allow-transcoding
  rtp transcoder-base 0
  transcoder-remote-base 4000
  osmux off
 trunk 1
  sdp audio-payload number 126
  sdp audio-payload name AMR/8000
  sdp audio-payload send-ptime
  sdp audio-payload send-name
  rtp keep-alive once
  loop 0
  no rtcp-omit
  no rtp-patch
  allow-transcoding


More information about the OpenBSC mailing list