This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Sipos Csaba sipos.csaba at kvk.uni-obuda.huDear Alexander, I am playing with the meas_web utility, and I finally have the missing informations for the README to make the installation process more complete, will sending a new copy for you soon. Altough I experienced some problems: 1. I noticed that the "Type" and "Channel" parameters are not shown on the web interface, but if I run "show lchan" in the BSC console, I got the correct results for both parameters. I checked the temporary files which stores the meas_feed data, and it seems these data parts are not even there, and this is the reason the web interface is not displaying them. 2. Is there a way to set a time after the inactive old subscribers are deleted from the web interface? On my end the subscribers are just keep coming (a lot of rejected LOC updates) and when they reach the "maximum item number" count the web interface just crashes. Would be lovely to have a timeout value next to the "max item number" to set the amount of time of which the inactive subscribers would disappear from the web interface. And the web interface should not crash even if there is more transactions than the maximum item number :-) Regards, Csaba ----- Eredeti üzenet ----- Feladó: "Sipos Csaba" <sipos.csaba at kvk.uni-obuda.hu> Címzett: "Alexander Chemeris" <alexander.chemeris at gmail.com> Másolatot kap: "OpenBSC Mailing List" <openbsc at lists.osmocom.org> Elküldött üzenetek: Hétfő, 2015. Október 26. 22:51:04 Tárgy: Re: Meas_web and meas_json Dear Alexander, > Do you mind contributing to the documentation? I don't mind at all :-) In fact I have some points which was a littlebit to brief and we might want to put some more details. For example the fact that the meas_json utility is not part of the master and where can it be found :-) What would be nice is to make it work with the PCU to get and display the GPRS/EDGE meas data too. Will put up some wiki (or at least further detail the readme) and send it to you when I have the time, but first I want to finish the B200/B210 (and potentionally UmTRX) wiki page which you can find here: http://openbsc.osmocom.org/trac/wiki/Ettus_USRP_B2xx_family Its not finished yet, but most of the nasty stuff is up and it works, but here and there some more details will be needed for newbies. If you, or anyone else find any problems, have some questions or suggestions, please tell me so I can correct it :-) Regards, Csaba ----- Eredeti üzenet ----- Feladó: "Alexander Chemeris" <alexander.chemeris at gmail.com> Címzett: "Sipos Csaba" <sipos.csaba at kvk.uni-obuda.hu> Másolatot kap: "OpenBSC Mailing List" <openbsc at lists.osmocom.org> Elküldött üzenetek: Hétfő, 2015. Október 26. 22:15:30 Tárgy: Re: Meas_web and meas_json Hi Sipos, On Mon, Oct 26, 2015 at 11:45 PM, Sipos Csaba <sipos.csaba at kvk.uni-obuda.hu> wrote: > Just wanted to thank you for the web version of meas_vis utility, and wanted to confirm that it works very well with Nokia Site family (E1 based) and the USRP B200 too :-) Glad someone found it useful and was even able to get it working. :) Do you mind contributing to the documentation? It would be great to have a brief page about it at the wiki and some more details for the installation instructions, but we never got to write it :( > It would make life easier if the meas_json utility would make it to the master branch: > > http://cgit.osmocom.org/openbsc/log/?h=achemeris/meas_json > > Is there a reason it is not being merged? I guess the primary reason is that I've never submitted it. I still plan on doing that, just need to find some time to do that. -- Regards, Alexander Chemeris. CEO, Fairwaves, Inc. https://fairwaves.co