This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Josh toal joshtoal17 at gmail.comHi All there was typo in my earlier post therefore posting again--sorry! for that in my sgsn log I am getting <0002> gprs_gmm.c:921 -> GMM RA UPDATE REQUEST type="RA updating" LLC XID RESET REJECT <0002> gprs_gmm.c:860 <- ROUTING AREA UPDATE REJECT then <0002> gprs_gmm.c:640 -> GMM ATTACH REQUEST MI(xxxxxxx) type="GPRS attach" <0002> gprs_gmm.c:444 <- GPRS IDENTITY REQUEST: mi_type=02 <0011> gprs_bssgp.c:753 BSSGP BVCI=2 Rx Flow Control BVC <0011> gprs_bssgp.c:376 BSSGP TLLI=0xxxxxx Rx UPLINK-UNITDATA <0012> gprs_llc.c:554 LLC SAPI=1 C FCS=0xxxxx=UI DATA <0002> gprs_gmm.c:582 -> GMM IDENTITY RESPONSE: mi_type=0x02 MI(xxxxxxxxx) <0002> gprs_gmm.c:352 <- GPRS ATTACH ACCEPT (new P-TMSI=0xxxxxxx) <0011> gprs_bssgp.c:376 BSSGP TLLI=0xxxxxx Rx UPLINK-UNITDATA <0012> gprs_llc.c:554 LLC SAPI=1 C FCS=0xxxxxxxx=UI DATA <0002> gprs_gmm.c:1052 -> ATTACH COMPLETE and then <0002> gprs_gmm.c:1319 -> ACTIVATE PDP CONTEXT REQ: SAPI=3 NSAPI=5 IETF IPv4 <000f> sgsn_libgtp.c:126 Create PDP Context <000f> sgsn_libgtp.c:379 libgtp cb_conf(type=16, cause=128, pdp=0xxxxxxx, cbp=0x1xxxxx) <000f> sgsn_libgtp.c:265 Received CREATE PDP CTX CONF, cause=128(Request accepted) <0002> gprs_gmm.c:1197 <- ACTIVATE PDP CONTEXT ACK finally <0002> gprs_gmm.c:1432 -> DEACTIVATE PDP CONTEXT REQ (cause: Regular deactivation) <000f> sgsn_libgtp.c:212 Delete PDP Context <000f> sgsn_libgtp.c:402 PDP Context was deleted <000f> sgsn_libgtp.c:379 libgtp cb_conf(type=20, cause=128, pdp=(nil), cbp=0xxxxxx) <000f> sgsn_libgtp.c:321 Received DELETE PDP CTX CONF, cause=128(Request accepted) <0002> gprs_gmm.c:1290 <- DEACTIVATE PDP CONTEXT ACK Am I getting PDP deactivation because of routing area reject. Also noticed that TLLI changes from Activate PDP context onwards. This TLLI is based on TMSI/P-TMSI Upto Attach complete procedure I have different TLLI. For setup I have BSC, SGSN on eth0 and eth0:1 respectively and GGSN on eth1 ( I have external network adapter). Can anybody suggest something why I am getting pdp deactivation. regards Josh -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20140603/d9fdb5a6/attachment.htm>