This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Maicon Kist maiconkist at gmail.comHi Andreas, the output of the openbsc-trx: ((*)) | / \ OsmoBTS Using MAC address of eth0: xxxxxxx <0006> scheduler.c:212 Init scheduler for trx=0 <000a> trx_if.c:484 Open transceiver for trx=0 <000a> trx_if.c:495 Waiting for transceiver send clock % rtp bind-ip is now deprecated <0006> scheduler.c:2933 initial GSM clock received: fn=686409 <0001> oml.c:249 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Power off -> OK <0001> oml.c:256 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE NULL -> Disabled <0001> oml.c:217 OC=RADIO-CARRIER INST=(00,00,ff) Tx STATE CHG REP <000d> abis.c:59 Link down, dropping message. <0001> oml.c:358 OC=RADIO-CARRIER INST=(00,00,ff) Tx SW ACT REP <000d> abis.c:59 Link down, dropping message. <0001> oml.c:249 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Power off -> OK <0001> oml.c:217 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) Tx STATE CHG REP I started it with: osmobts-trx -c ~/.osmocom/osmo-bts.cfg and osmo-nitb: osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -m -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM with lcr and the transceiver started before these commands. The configuration files are the default provided in http://openbsc.osmocom.org/trac/wiki/network_from_scratch PS: Calls to 995 and 993 are working perfectly. Best Regards, abc On Thu, Sep 19, 2013 at 9:52 AM, Andreas Eversberg <andreas at eversberg.eu>wrote: > Maicon Kist wrote: > > <000d> abis.c:428 Connection to BSC failed > is bsc running? did you set correct ip to openbsc? what does openbsc > output show when you start osmobts-trx? > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20130919/338663d2/attachment.htm>