This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Peter Stuge peter at stuge.seSipos Csaba wrote: > > I'd suggest to make LCR use SIP for communcation with Asterisk. See > > http://stuge.se/lcr.txt for a minimal example of LCR configuration. > > Do you have some more example configuration files for the Asterisk end > of the SIP trunk? I think you have to be able to configure Asterisk on your own, and if you aren't then probably the OpenBSC mailing list is not a very good place to ask for help. > I am almost sure that RTP bridge can only be used with IP based BTSes Yes, that makes sense. > My problem is that I made test calls an analyzed the logs at both LCR > and Asterisk end, and there is no difference between a good and a half > sided call. I believe that using SIP would make available more information. But of course a solid understanding of SIP is required to use it. //Peter