This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Andreas Eversberg andreas at eversberg.euLuca Bongiorni wrote: > Do you know if it possible to reset in someway? > > reset-procedure: In case you have a static-ip configured nanoBTS or other inconvenience with the nanoBTS ... just use the reset-dongle. The reset-dongle is a plug for the TIB-IN with short 9+10. The reset procedure is as follows: Power off Reset-dongle in TIB-IN Power on Wait until the light is flashing red (30 sec.) Power off When you are now starting the nanoBTS the light will flash red/green to tell you there is no ID set. Find the ip now by ipaccess-find eth0 Set the ID by ipaccess-config -u 1/0/0 999.999.999.999 The 999.999.999.999 is for the ip :-)