This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgHi Kwan,
On Tue, Mar 13, 2012 at 01:38:48PM +0000, Kwan wrote:
> Yes , that is a BSplus. Interwave engineer will come , and take following action:
> -add an extra BTS configuration
> -enter the proper BTS parameters to allow register and call.
> -boot the BTS with its connection to BS+
> -after the TRX is online, swap the A-bis E1 of BTS to openBSC.
To my understanding a BSplus has an integrated BSC and connects direclty
ot the MSC using the A(SCCP/BSSAP/BSSMAP) interface. you cannot connect
that to OpenBSC.
Even if you run the Interwave only as a BTS (without the 'plus'), then
you will need detailed documentation and/or protocol traces for their
A-bis OML, and then write the code for that in OpenBSC. So even in the
most ideal situation, I wuold consider a couple of days software
development time are required.
--
- Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)