This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Don Fanning don at 00100100.netHello Andreas, What changes need to be done in routing.conf to use pipe via SIP instead of chan_lcr? Thanks, -Don On Sun, Mar 4, 2012 at 11:44 PM, jolly <andreas at eversberg.eu> wrote: > > Do I have to have mISDN for LCR even im not going to use any isdn > > interface ? Im trying to connect the NITB to LCR and LCR to asterisk > > all on ip. > > > > Thanks for any help. > > > > Rgds > > Nik > hi nik, > > you don't need misdn to use lcr with sip and gsm anymore. also you don't > need any patch. the lcr and openbsc compile out of the box supporting > each other. the howto is a bit outdated. > > try to compile the lcr from the git. don't use chan_lcr, since it still > works with isdn only. you need to setup a sip interface in interface.conf: > > [sip] > sip <local ip> <remote ip>[:<port>] > sip 10.0.0.12 10.0.0.34 > earlyb no > tones no > > use asterisk machine for remote ip. if you have asterisk on the same > machine, change the sip port of asterisk and use "remoteip:port". > > regards, > > andreas > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20120313/d0bd2f6b/attachment.htm>