This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Konrad Meier meierk at informatik.uni-freiburg.deOn 05.06.2012 17:41, Arturo Rivas wrote: > Hi! > > All programs was compiled correctly buy when I try to execute lcr: > > /rivas at pfc:~$ sudo /opt/lcr/sbin/lcr start/ > / > / > /** LCR Version 1.10/ > / > / > /000000 DEBUG (in getrulesetbyname() line 1871): ruleset main found./ > /000000 DEBUG (in mISDNloop_open() line 36): Open external interface of > loopback./ > /000000 DEBUG (in mISDNport_open() line 2388): Port has 30 b-channels./ > /000000 DEBUG (in mISDNport_open() line 2409): using 'mISDN_dsp.o' module/ > /000000 TRACE 05.06.12 17:36:19.305 CH: PORT (open) port 1 mode network > channels 30/ > /000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect > to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/ > /LCR 1.10 started, waiting for calls.../ > /000000 TRACE 05.06.12 17:36:19.326 --: LCR 1.10 started, waiting for > calls.../ > /000000 TRACE 05.06.12 17:36:20.480 --: REMOTE APP registers app > name=asterisk/ > /000000 ERROR (in mncc_socket_retry_cb() line 1102): Could not connect > to MNCC socket /tmp/bsc_mncc, retrying in 5 seconds/ This output looks ok. You have to start the BSC software "osmo-nitb". The BSC is no longer integrated into LCR. Regards Konrad