This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Harald Welte laforge at gnumonks.orgHi Ravi and Peter, Regarding Ravi's question: > > 2)I've configured bts ip,unit id, oml ip of one bts.But not able to > > get the firmware. I have never seen a nanoBTS that ships without firmware. How would you be able to set the Unit ID, etc. if there was no firmware on the nanoBTS? If you need specific firmware versions for your nanoBTS, please contact your supplier/distributor or ip.access directly. > > How to get it and configure for NanoBTS?? > nanoBTS is a different project and based on the USRP. checkout > openbts.org to get further informations. Hrm? Just to clarify: * OpenBSC is our software. * nanoBTS is a product manufactured by ip.access. Can be used with OpenBSC * OpenBTS is a SDR GSM Um-SIP gateway by Kestrel Signal Processing; does not need OpenBSC as it bypasses the clasic BSC/MSC components. Ravi: OpenBSC is Free Software provied 'as is'. You are free to download it from our site, study the source code, compile it and use it like you seem fit. But there is no documentation apart from what is on the website (wiki) and in the source code itself. There is no "end user support". You get the software for free, but you're on your own from that point on. It is not our task to provide you detailed guidance on how to install and use the software. Regards, Harald -- - Harald Welte <laforge at gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)