This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Thomas Ansorg kobayashi_maru at onlinehome.dehi all,
the misdn driver is nice configured now(dmask=0x00020002,
bmask=0x0000fffc,0xfffc0000), but i get the error message "could not
bind l2 socket Invalid argument". the full output is:
2 devices found
id: 0
Dprotocols: 00000018
Bprotocols: 0000000e
protocol: 4
nrbchan: 14
name: hfc-e1.1-1
activate bchan
activate bchan
2 devices found
id: 1
Dprotocols: 00000018
Bprotocols: 0000000e
protocol: 4
nrbchan: 14
name: hfc-e1.1-2
could not bind l2 socket Invalid argument
bts1 (connected to the pc) is configured port 0 ts 1 tei 25 in multidrop
config
bts2 is configured port 1 ts 6 tei 26 in line config
any ideas?
--
Wer Rechtschreibfehler findet, darf sie behalten!