This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/OpenBSC@lists.osmocom.org/.
Thomas Ansorg kobayashi_maru at onlinehome.dehello
after compiling the new software, bs11_config tells me for bts1 (the
working one):
bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: No Load
Abis-link: Restoring
BS11 ATTRIBUTES:
BS-11 ESN PCB Serial Number: 001104
BS-11 ESN Hardware Code Number: 135-2044/03.07
BS-11 ESN Firmware Code Number: 135-2044/03.07
PLL Set Value=1006, Work Value=1038
SITE MANAGER ATTRIBUTES:
E1 Channel: Port=0 Timeslot=1 (Full Slot)
TEI: 25
BS11 Line Interface ATTRIBUTES:
PLL Mode: Standalone
BS11 CCLK ATTRIBUTES:
CCLK Accuracy: High (1)
CCLK Type=0
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
BPORT0 ATTRIBUTES:
Line Configuration: Multi-Drop (1)
BPORT1 ATTRIBUTES:
Line Configuration: Multi-Drop (1)
LMT LOGOFF: ACK
***************************************************************************
i set the bport multi thing on my own
the 2nd bts said this:
bs11_config (C) 2009-2010 by Harald Welte and Dieter Spaar
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
LMT LOGON: ACK
PHASE: 3 Normal MBCCU0: Load MBCCU1: No Load
Abis-link: Restoring
BS11 ATTRIBUTES:
BS-11 ESN PCB Serial Number: 001112
BS-11 ESN Hardware Code Number: 135-2044/03.03
BS-11 ESN Firmware Code Number: 135-2044/03.03
PLL Set Value=1073, Work Value=1073
SITE MANAGER ATTRIBUTES:
E1 Channel: Port=0 Timeslot=6 (Full Slot)
TEI: 26
BS11 Line Interface ATTRIBUTES:
PLL Mode: Standalone
BS11 CCLK ATTRIBUTES:
CCLK Accuracy: High (1)
CCLK Type=0
BS11 Power Amplifier 0 ATTRIBUTES:
TRX Power: 30mW (GSM)
BPORT0 ATTRIBUTES:
Line Configuration: Multi-Drop (1)
BPORT1 GET ATTR NACK
LMT LOGOFF: ACK
*****************************************************************************
as you can see, i set the port to 0 on both, bts1 works on ts1, tei 25
and bts2 on ts6, tei 26.
does this configuration match with the attached config-file?
unfortunately i couldnt test it thoroghly today, it was late :-(
there is a strange errormessage at the end of bts2 report, a possible
problem? anyway, i wasnt able to create a bport, neither in connected
nor disconnected mode
T.
--
Wer Rechtschreibfehler findet, darf sie behalten!
-------------- next part --------------
!
! OpenBSC configuration saved from vty
! !
password foo
!
line vty
no login
!
network
network country code 262
mobile network code 10
short name Y-Phone
long name Yodaphone
handover 1
bts 0
type bs11
band GSM900
cell_identity 1
location_area_code 1
training_sequence_code 7
base_station_id_code 63
oml e1 line 0 timeslot 1 sub-slot full
oml e1 tei 25
trx 0
arfcn 121
max_power_red 0
rsl e1 line 0 timeslot 1 sub-slot full
rsl e1 tei 1
timeslot 0
phys_chan_config CCCH+SDCCH4
e1 line 0 timeslot 1 sub-slot full
timeslot 1
phys_chan_config TCH/F
e1 line 0 timeslot 2 sub-slot 1
timeslot 2
phys_chan_config TCH/F
e1 line 0 timeslot 2 sub-slot 2
timeslot 3
phys_chan_config TCH/F
e1 line 0 timeslot 2 sub-slot 3
timeslot 4
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 0
timeslot 5
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 1
timeslot 6
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 2
timeslot 7
phys_chan_config TCH/F
e1 line 0 timeslot 3 sub-slot 3
trx 1
arfcn 123
max_power_red 0
rsl e1 line 0 timeslot 1 sub-slot full
rsl e1 tei 2
timeslot 0
phys_chan_config TCH/F
e1 line 0 timeslot 4 sub-slot 0
timeslot 1
phys_chan_config TCH/F
e1 line 0 timeslot 4 sub-slot 1
timeslot 2
phys_chan_config TCH/F
e1 line 0 timeslot 4 sub-slot 2
timeslot 3
phys_chan_config TCH/F
e1 line 0 timeslot 4 sub-slot 3
timeslot 4
phys_chan_config TCH/F
e1 line 0 timeslot 5 sub-slot 0
timeslot 5
phys_chan_config TCH/F
e1 line 0 timeslot 5 sub-slot 1
timeslot 6
phys_chan_config TCH/F
e1 line 0 timeslot 5 sub-slot 2
timeslot 7
phys_chan_config TCH/F
e1 line 0 timeslot 5 sub-slot 3
bts 1
type bs11
band GSM900
location_area_code 2
training_sequence_code 7
base_station_id_code 63
oml e1 line 0 timeslot 6 sub-slot full
oml e1 tei 26
trx 0
arfcn 122
max_power_red 0
rsl e1 line 0 timeslot 6 sub-slot full
rsl e1 tei 1
timeslot 0
phys_chan_config CCCH+SDCCH4
e1 line 0 timeslot 7 sub-slot 0
timeslot 1
phys_chan_config SDCCH8
e1 line 0 timeslot 7 sub-slot 1
timeslot 2
phys_chan_config TCH/F
e1 line 0 timeslot 7 sub-slot 2
timeslot 3
phys_chan_config TCH/F
e1 line 0 timeslot 7 sub-slot 3
timeslot 4
phys_chan_config TCH/F
e1 line 0 timeslot 8 sub-slot 0
timeslot 5
phys_chan_config TCH/F
e1 line 0 timeslot 8 sub-slot 1
timeslot 6
phys_chan_config TCH/F
e1 line 0 timeslot 8 sub-slot 2
timeslot 7
phys_chan_config TCH/F
e1 line 0 timeslot 8 sub-slot 3
trx 1
arfcn 124
max_power_red 0
rsl e1 line 0 timeslot 6 sub-slot full
rsl e1 tei 2
timeslot 0
phys_chan_config TCH/F
e1 line 0 timeslot 9 sub-slot 0
timeslot 1
phys_chan_config TCH/F
e1 line 0 timeslot 9 sub-slot 1
timeslot 2
phys_chan_config TCH/F
e1 line 0 timeslot 9 sub-slot 2
timeslot 3
phys_chan_config TCH/F
e1 line 0 timeslot 9 sub-slot 3
timeslot 4
phys_chan_config TCH/F
e1 line 0 timeslot 10 sub-slot 0
timeslot 5
phys_chan_config TCH/F
e1 line 0 timeslot 10 sub-slot 1
timeslot 6
phys_chan_config TCH/F
e1 line 0 timeslot 10 sub-slot 2
timeslot 7
phys_chan_config TCH/F
e1 line 0 timeslot 10 sub-slot 3
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://lists.osmocom.org/pipermail/openbsc/attachments/20101217/de8fb57b/attachment.bin>